Neurig

DNA Neural Modeling
Explore 30 amp and effect models designed to reproduce how the original equipment responds as its controls change.

Native NAM Compatibility
Load compatible NAM A2-Lite captures of amplifiers, pedals and complete signal chains.

Capture Your Own Equipment
Initiate captures from the pedal and send them over Wi-Fi to TONE3000 for cloud-based AI analysis. The resulting NAM capture can then be used in your rigs.

Extensive Effects Selection
Choose from 139 built-in effects, including drives, modulation, delays and reverbs, and combine up to 14 amps and effects in a rig.

Multi-Layer Cabinet IRs
Each Multi-Layer cabinet model combines three impulse responses recorded at different volumes. Microphone and placement options provide further tonal control.

Custom Rigs and Presets
Start with 75 ready-to-play rigs or create your own, with four presets per rig for organizing different sounds.

Seamless Preset Changes
Switch between presets within a rig without audio dropout, allowing delay and reverb trails to continue naturally.

Parallel Signal Routing
Run effects in parallel or create separate signal paths for your stage amplifier and PA system.

Dual Touchscreen Editing
Access rig settings and effects through two touchscreens for direct navigation and sound editing.

SessionZ Pedal App Integration
Edit and manage rigs over Bluetooth and explore compatible NAM captures and IRs from TONE3000.

Bluetooth Audio Playback
Play along with music streamed from a compatible device.

USB Audio Interface
Record through the built-in stereo USB audio interface with support for 32-bit float and 24-bit audio.

Stereo Looper and Tuner
Create loops with overdub, undo and redo functions, and tune using options for standard, open, DADGAD, seven-string and down-tuned guitars.

Flexible External Connections
Integrate external pedals or rack equipment through the send/return loop, connect MIDI devices, or add an optional expression pedal or footswitch.

Rechargeable Power and Wi-Fi Updates
Play using the built-in battery or USB power. Download firmware updates over Wi-Fi without connecting a computer.

General
Device Type: Neural amp and effects modeler
DNA Amp and Effect Models: 30
Built-In Effects: 139
Maximum Simultaneous Amps and Effects: 14
Included Ready-to-Play Rigs: 75
User Rig Capacity: 200
Presets per Rig: 4
Displays: Two touchscreen LCDs, 240 × 320 pixels each

Modeling and Cabinet Processing
Neural Modeling Engine: DNA Engine
Native Capture Playback Support: NAM A2-Lite
Capture Processing: Wi-Fi transfer to TONE3000 for cloud-based AI analysis
Multi-Layer Cabinet IRs: 22
Impulse Responses per Multi-Layer Cabinet: 3, recorded at different volumes
User Cabinet IR Slots: 50
Signal Routing: Parallel processing and split signal paths

Audio Processing and Performance
Sampling Frequency: 48 kHz
A/D Conversion: 24-bit, 64× oversampling
D/A Conversion: 24-bit, 64× oversampling
Internal Signal Processing: 32-bit float
Frequency Response: 20 Hz–20 kHz, +0.5/−0.5 dB into a 10 kΩ load
Input Signal-to-Noise Ratio: 123 dB
Residual Noise Floor: −102.1 dBu

Instrument Input
Connector: Standard mono phone jack
Maximum Input Level: +12.4 dBu
Input Impedance: 1 MΩ

Return / Sub Input
Connector: Standard mono phone jack
Maximum Input Level, Instrument Mode: +12.4 dBu
Maximum Input Level, Line Mode: +18.4 dBu
Input Impedance: 1 MΩ

Main Outputs
Connectors: Left and right standard mono phone jacks
Maximum Output Level, Instrument Mode: +12.4 dBu
Maximum Output Level, Line Mode: +18.4 dBu
Output Impedance: 330 Ω

Send / Sub Output
Connector: Standard mono phone jack
Maximum Output Level, Instrument Mode: +12.4 dBu
Maximum Output Level, Line Mode: +18.4 dBu
Output Impedance: 330 Ω

Headphone Output
Connector: 3.5 mm stereo mini jack
Maximum Output Power: 24 mW + 24 mW into 32 Ω
Output Impedance: 56 Ω

Control and MIDI
External Control Input: Compatible with optional FS01 footswitch or FP02M expression pedal
MIDI Connections: 3.5 mm MIDI input and output
USB MIDI: USB 1.1 Full Speed

USB Audio Interface
Connector: USB Type-C
USB Standard: USB 2.0 High Speed
Audio Channels: 2 inputs / 2 outputs
Sample Rate: 48 kHz
Audio Formats: 32-bit float / 24-bit
USB Bus Power: Supported
Cable Requirement: USB cable supporting data transfer

Wireless Connectivity
Bluetooth Version: 5.4, BR/EDR/BLE
Maximum Bluetooth Transmit Power: 7.5 dBm
Wi-Fi Frequency Range: 2.400–2.4835 GHz
Wi-Fi Standards: 802.11b/g/n/ax
Maximum Wi-Fi Transmit Power: 19 dBm
Companion App: SessionZ Pedal
Firmware Updates: Via Wi-Fi

Practice Functions
Looper: Stereo
Maximum Loop Length: 45 seconds
Looper Functions: Overdub, undo and redo
Tuner: Chromatic, with standard, open, DADGAD, seven-string and down-tuning support

Battery and Power
Battery Type: Rechargeable lithium-ion
Battery Capacity: 2,900 mAh
Nominal Battery Voltage: 3.7 V DC
Maximum Battery Voltage: 4.2 V DC
Battery Operation Time: Approximately 4.5 hours, depending on use
Charging Time: Approximately 3 hours
USB AC Adapter Requirement: 10 W, 5 V / 2 A or higher
USB Power: Supported

Dimensions and Weight
Dimensions (W × D × H): 236.4 × 120.6 × 54.2 mm
Weight: 850 g