The Audio-Technica AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings.
Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.
Caractéristiques
Three switchable polar patterns: omni, cardioid, figure-of-eight
Switchable 80 Hz high-pass filter and 10 dB pad
Large diaphragm for smooth, natural sound and low noise
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
Includes shock mount & protective pouch
Spécifications
ELEMENT
Externally-polarized (DC bias) condenser POLAR PATTERNS
Cardioid,
Omnidirectional,
Figure-of-Eight FREQUENCY RESPONSE
20-20,000 Hz LOW FREQUENCY ROLL-OFF
80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY
Â-42 dB (7.9 mV) re 1V at 1 Pa IMPEDANCE
120 ohms MAXIMUM INPUT SOUND LEVEL
149 dB SPL, 1 kHz at 1% T.H.D.;
159 dB SPL, with 10 dB pad (nominal) NOISE
17 dB SPL DYNAMIC RANGE (typical)
132 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO
77 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS
11-52V DC, 4.7 mA typical SWITCHES
Polar selection;
Flat, roll-off; 10 dB pad (nominal) WEIGHT
412 g (14.5 oz) DIMENSIONS
170.0 mm (6.69") long,
52.0 mm (2.05") maximum body diameter OUTPUT CONNECTORS
Integral 3-pin XLRM-type ACCESSORIES FURNISHED
AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE
R5