The AT4022 omni mic is great for piano, acoustic guitar, & other acoustic instruments. A flat, extended Hz response & wide dynamic range is ideal for studio & live applications
The AT4022 handles high SPLs with ease. The microphone's omnidirectional polar pattern preserves the "sound" of the recording location, delivers flat response and freedom from proximity effect. Its low-mass diaphragm improves transient response and reduces handling/mechanical noise transfer.
Caractéristiques
Outstanding performance and rugged construction, ideal for critical studio & live applications
High SPL handling and wide dynamic range
Flat, extended frequency response
Switchable 80 Hz hi-pass filter and 10 dB pad
Omnidirectional polar pattern provides maximum ambient pickup
Low self noise perfectly suited for digital recording equipment
Exceptional reproduction of low frequency sounds
Low-mass element for superb transient response
Spécifications
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Omnidirectional
FREQUENCY RESPONSE: 20-20,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY: -34 dB (19.9 mV) re 1V at 1 Pa
IMPEDANCE: 250 ohms
MAXIMUM INPUT SOUND LEVEL: 146 dB SPL, 1 kHz at 1% T.H.D.;156 dB SPL, with 10 dB pad (nominal)
NOISE: 13 dB SPL
DYNAMIC RANGE (typical): 133 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 81 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 3.0 mA typical
SWITCHES: Flat, roll-off; 10 dB pad
WEIGHT: 124 g (4.4 oz)
DIMENSIONS: 144.0 mm (5.67") long, 21.0 mm (0.83") maximum body diameter
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case