The Audio Technica BP4073 is a Line plus Gradient Condenser Microphone. Direct-coupled, balanced output ensures a clean signal even in high-output conditions.
With an overall length of just 9.17" and weight of just 3.5 oz, this microphone adds virtually no heft to the end of a fish pole or the top of a minicam. Through the use of an innovative Audio-Technica design, the interference tube of the BP4073 provides a narrow acceptance angle, effective for long-distance pickup. The highly directional mics offer low self-noise and are fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
Caractéristiques
Designed for critical long-distance pickup in broadcasting, film/TV production and theater sound reinforcement applications
Direct-coupled, balanced output ensures a clean signal even in high-output conditions
Exclusive acoustic design provides same directivity as mics up to 50% longer
Switchable 150 Hz hi-pass filter
Rugged housing made of lightweight structural-grade aluminum alloy
Spécifications
ELEMENT : Externally polarized (DC bias) condenser
POLAR PATTERN : Line + gradient
FREQUENCY RESPONSE : 30-20,000 Hz
LOW FREQUENCY ROLL-OFF : 150 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY : -23 dB (70.8 mV) re 1V at 1 Pa
IMPEDANCE : 100 ohms
MAXIMUM INPUT SOUND LEVEL : 126 dB SPL, 1 kHz at 1% T.H.D.
NOISE : 14 dB SPL
DYNAMIC RANGE (typical) : 112 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO : 80 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS : 11-52V DC, 3.2 mA typical