The Audio Technica PRO 35 is a Cardioid Condenser Clip-on Instrument Microphone. Cardioid polar pattern reduces pickup of sounds from the sides and rear.
Designed for sax, toms, brass and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.
UniMount clip permits accurate positioning, provides shock resistance and protects elementCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceExtended frequency response captures subtle nuances of the performance6' (1.8 m) cable permanently attached to microphone
ELEMENT: Fixed-charge back plate, permanently polarized condenserPOLAR PATTERN: CardioidFREQUENCY RESPONSE: 50-15,000 HzLOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octaveOPEN CIRCUIT SENSITIVITY: -45 dB (5.6 mV) re 1V at 1 PaIMPEDANCE: 250 ohmsMAXIMUM INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.DYNAMIC RANGE (typical): 115 dB, 1 kHz at Max SPLSIGNAL-TO-NOISE RATIO: 64 dB, 1 kHz at 1 PaPHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typicalSWITCH: Flat, roll-offWEIGHT (MICROPHONE): 0.3 oz (8 g)WEIGHT (POWER MODULE): 2.9 oz (81 g)DIMENSIONS (MICROPHONE): 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameterDIMENSIONS (POWER MODULE): 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameterOUTPUT CONNECTOR (POWER MODULE) : Integral 3-pin XLRM-typeCABLE: 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connectorACCESSORIES FURNISHED: AT8418 UniMount microphone instrument mount; AT8538 power module; soft protective pouchAUDIO-TECHNICA CASE STYLE: M12