The A-16II Personal Mixer allows each performer to create a unique, customized monitor mix on stage or in the studio.

The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.

The stereo output from the A-16II can be used to drive wired or wireless in-ears, headphones, powered floor wedges, an amplifier, or spot monitors.

The A-16II Personal Mixer is fully compatible with all Pro16 Series products, including Aviom's digital interface cards for Yamaha and DiGiCo digital mixing consoles. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices.

Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable.

Features

16-channel stereo mixer

Fully adjustable pan per channel

Line/Headphone audio output

Auto-detect mono/stereo circuitry

Simple set-up with Cat-5e cables

Sixteen Preset locations for storing custom mixes

Channels can be soloed, muted, or grouped

Global trim for reducing all channel volumes

Sixteen channel select buttons with dual LEDs

Pan/Spread control with LED readout

Channel volume control with LED level readout

Master Volume, Treble, and Bass controls

Mounts easily on a mic stand with the optional MT-1 mic stand mount

---

Specifications

A-Net Input/ Output : 1 input, 1 output Category 5 (RJ45 connector)
Digital to Analog Conversion Bit Depth : 24 bit
Signal to Noise Ratio : (Referenced to 0dB) -103dB
Tone Controls : Treble +/-12dB at 9kHz shelving, Bass +/-12dB at 160Hz shelving
Maximum Levels (RMS) : Line/Headphone outs: 1.0 watt at 100 ohms
Impedance : Line/Headphone outs: 140 ohms
Dimensions : 10.75" wide x 5.6" deep 2.25" high
Weight : 3.4 lbs.
Options : MT-1 Mic Stand Mount, EB-1 Extension Bracket