16-channel digital-to-analog converter for Pro16 digital snake and audio distribution systems
The AN-16/o v.4 Output Module connects to any Pro16 input module, console card, or A-Net distributor and provides 16 balanced TRS line-level analog outputs. Five output levels, from mic to +24dBu, are available to easily accommodate the level requirements of the gear its output signals are being connected to.
Use the AN-16/o v.4 anywhere analog outputs are required: on stage or at FOH in a digital snake, in the studio, for a recording split, or in even the most complex audio networks. Adding a digital split to a Pro16 system is as simple as connecting an additional AN-16/o v.4 Output Module. Sixteen balanced outputs are provided on the rear panel via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level.
Connecting to Wireless In-Ear Monitors
In personal mixing systems using the A360 Personal Mixer with the D800 or D800-Dante A-Net Distributors, the AN-16/o v.4 simplifies connections to wireless IEM systems. Each A360 Personal Mixer sends its stereo mix output back into the network which appears as a pair of channels on the AN-16/o v.4. Each AN-16/o v.4 supports up to eight A360s. Simply patch the analog outputs on the AN-16/o v.4 into the IEM transmitter's inputs. No analog cables are required at the A360 on stage.
Digital Snakes and Audio Networks
Use the AN-16/o v.4 anywhere analog outputs are required: on stage or FOH in a digital snake, in the studio, for a recording split, or in even the most complex audio networks. Adding a digital split to a Pro16 system is as simple as connecting an additional AN-16/o v.4 Output Module. The AN-16/o v.4 can be connected to a Pro64 digital snake or audio network by adding the ASI A-Net Systems Interface.
Caractéristiques
16 balanced mic- or line-level outputs
Four-position output level switch per channel pair
+24, +18, and +4dBu line-level, or mic-level outputs
Converts A-Net digital stream to 16 analog audio channels
48kHz, 24-bit D/A converters
Unlimited splits and digital copies
Optional AN-16SBR System Bridge combines up to 4 A-Net streams onto one cable
Cat-5e cable runs up to 500 feet (150 meters) between devices
Spécifications
Audio Outputs
16 channels, balanced
Outputs
DB25 multipin connectors (2); Tascam analog audio pinout
Impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu
D/A Conversion
48kHz sample rate, 24 bit
Frequency Response
4Hz-22kHz
A-Net Input/Output
one EtherCon Category 5 (RJ45 connector)
A-Net Expansion
one EtherCon Category 5 (RJ45 connector)
Output Level Settings
Four-position switch, per channel pair;
+24dBu, +18dBu, +4dBu, and Mic
Channel LED Indicators
Signal Present and Clip, per channel
Metering
LEDs; green: Signal Present; red: Clip; per channel
Maximum Output Level
+24dBu
Output Impedance
226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)
