The BAE 1073 Module is an authentic reproduction of vintage Neve 1073 console module. It fits the BAE racks for vintage Neve modules as well as fitting into vintage Neve A series.
The BAE 1073 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.
The BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.
Caractéristiques
High Frequency: +/-16dB fixed frequency shelving at 12kHz
Low Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
Mid Range: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz
High Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz
Spécifications
Frequency Response
10Hz to -3dB at 55kHz 3 Band Equaliser
HF: +/-16dB fixed frequency shelving at 12kHz
LF: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220Hz
MF: +/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHz High Pass Filter
50Hz, 80Hz, 160Hz & 300Hz Mic Input Impedance
1200/300 ohms Line Input Impedance
10k ohms DI Input Impedance
150k ohms Output Impedance
35 ohms Common Mode Rejection Ratio
100dB min @ 60Hz Maximum Output Level
+27.4 dBu @ 600 Power Requirements
115/230 VAC, 28W Gain dB
0 to 80 dB Equivalent Input Noise
-110 dBu; Unweighted 300kHz Bandwidth Weight (Single/Dual)
6 LBS / 2.72 KG
10 LBS / 4.54 KG Dimensions in Inches (Module/Rackmount)
45 mm W x 8.75 inches H x 10.5 inches D
19W x 1.75L x 9D