The BAE 1073MPF Single Channel preamp yields a really fat sound. This is the high-pass filter version of the 1073MP. Same Class A components as the 1073 and 1084.
The 1073MPF is the mic pre-amp version of the 1073 equaliser, sharing the the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs and maintained focused mids.
A transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.
There is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.
As a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.
All Class A, transformer-coupled design in a 19" 1U chassis.
Line level XLR inputs for extra versatility as a line preamp.
High impedance DI for guitar and synth.
The same Class A components as the 1073 and 1084.
Illuminated phase reverse and phantom power push-buttons.
Input impedance selector switch between 1200 and 300 ohms.
Same modular design and hand-wiring BAE is known for.
Regulated linear power supply will run up to four channels.
10Hz to -3dB at 55kHz Mic Input Impedance
1200/300 ohms Line Input Impedance
10k ohms DI Input Impedance
150k ohms Output Impedance
65 ohms Common Mode Rejection Ratio
100dB min @ 60Hz Maximum Output Level
+27.4 dBu @ 600 Power Requirements
115/230 VAC, 30W Gain dB
0 to 71 dB Equivalent Input Noise
-110 dBu; Unweighted 300kHz Bandwidth Weight (Single/Dual)
8 LBS/3.63 KG
10 LBS/4.54 KG Dimensions (Inches)
19W x 1.75L x 9D