The DXA-SLR ULTRA. Ultra performance for your DSLR camera. Capture pro audio from virtually any microphone or wireless directly to your dslr or mirrorless camera.
Pro Audio for your DSLR or Mirrorless Camera - Our most powerful adapter ever!
The BeachTek DXA-SLR ULTRA bridges the gap between DSLR and professional video cameras by enabling professional audio features that facilitate high-quality audio recording directly to the camera. Superb operation and ease of use to make capturing pro audio a snap. Since the audio is recorded directly the camera it will always in sync with the video, eliminating the need for any post production processing. The DXA-SLR ULTRA is the missing link for anyone serious about capturing high-quality audio.
Easily Connect Professional Audio Sources - Attach virtually any audio gear including wireless systems, mixers, sound boards and professional dynamic and condenser microphones
Connect any two audio sources for two channel recording. A typical setup for weddings is a shotgun mic on one channel to capture ambient audio and a wireless on the other to clearly capture the vows. A shotgun mic and/or handheld dynamic mic are often used for ENG work and documentaries. For music videos, you can even take a direct feed from the sound board to capture every note. Each channel can easily be independently adjusted for the optimum recording level - even while recording. The DXA-SLR ULTRA gives you the ability to connect whatever microphones work best for your situation.
Ultra Performance - New, powerful preamplifiers give you exceptionally clean audio with plenty of punch
Powerful low-noise preamplifiers with dual gain settings provide a strong, clear signal to the camera. This allows you to dramatically reduce the camera gain which effectively replaces the relatively noisy camera preamplifiers with the much cleaner preamplifiers in the adapter for hiss free audio. This is the key to dramatically increasing the signal-to-noise ratio while still being able to record audio directly to the camera. This eliminates having to use a separate digital audio recorder to capture quality audio. The inputs are transformer balanced which provide unrivaled common-mode noise rejection.
Feature Packed - The DXA-SLR ULTRA gives you all the features you need for connecting, controlling and monitoring the audio
Combo XLR / ¼" inputs provide maximum flexibility for connecting audio sources. Phantom power is available for each channel and is switchable between power saving 12 volts or full 48 volts. The inputs are transformer balanced for isolation and enhanced circuit protection. Transformers provide galvanic isolation from the driving signal, meaning there is no direct electrical connection to the sensitive input stage of the preamplifier. This protects against ground loops and damage resulting from connection to external faulty equipment. Built-in VU meters make it easy to verify the proper input levels at a glance, while the level controls allow you to adjust the output signal for optimum recording. Built-in fast acting limiters prevent distortion from overly hot inputs for worry free operation. The phone jack lets you monitor the audio from the adapter during recording, or camera during playback. You can also loop the output audio from your camera back into the adapter to monitor confidence sound.
Super Easy to Setup and Use - Nothing could be easier to use or provide better performance
Real switches and volume knobs mean no hunting through multi-layer menus trying to find or change settings. Since the audio is recorded directly to the camera, it will always be in sync with the video which eliminates the need for syncing in post. Everything about the adapter was designed to be extremely easy to use, from the ergonomic all metal chassis with nice rubber grips, to the bright easy to read VU meter and drift free volume controls.
Rugged Chassis - Engineered inside and out for the highest level of performance and reliability
Neutrik brand XLR connectors, recessed switches, rock solid electronics and isolating transformers make this super reliable and dependable. All wrapped up in a sturdy die cast aluminum chassis with nice rubber grips for easy hand holding. The adapter mounts neatly to the bottom of the camera and can also be mounted to any standard tripod.
Add Accessories to Your Camera - Includes baseplate with rods
A unique feature of the DXA-SLR ULTRA is the sleek detachable BRM-1 rod support system to easily attach a matte box, follow focus, top handle and other gear for incredible versatility. Includes two 3 rods that are threaded on both ends. Extra rods can be simply threaded on to extend to any length needed.
Two Neutrik combo XLR / 1/4" connectors
Loop back for playback monitoring
Unbalanced stereo mini-plug jack for connection to the camera
Built-in headphone amplifier with volume control
3.5 mm phone jack
Switchable 12V/OFF/48V phantom power for both channels
Easy to read level meters indicate proper signal level for each channel
Fast acting limiters prevent distortion from overly hot inputs
High / Low gain setting for each channel
Adjusts signal level output on each channel
Allows connections of microphones or mixers for versatility
Low Noise Preamplifiers
Exceptionally low noise circuitry for superb audio
Wide-bandwidth for full rich sound
Rod Support Base
Includes two threaded 3" rods
Provides an easy way to monitor audio on playback
Easily replaceable 9 volt battery
Low battery indicator
Sturdy die-cast aluminum enclosure
Maximum Input Levels
MIC level (LO gain) +10dBu
MIC level (HI gain) -20dBu
LINE level: +14dBu
-26dBu at 0dB on the VU meter
20Hz to 20kHz (+/- 0.5dB)
Less than 0.01% @ 1kHz, -30dBu input
85dB @ 1Khz, -30dBu input
Dual regulated 12 or 48 volt power supplies
Current to 14mA (direct short)
-18 to +3dB in 3dB increments
One 9 volt alkaline or lithium battery
3 hours typical with alkaline battery (no phantom)
8 hours typical with lithium battery (no phantom)
6" x 3.75" x 1.75" / (152 mm x 95 mm x 44 mm) / (L x W x H)