This true condenser microphone provides an enormous versatility due to its neutral sound and accurate design. The features of the MC 910 include the wide frequency response of 30 - 20,000 Hz and a signal-to-noise ratio of 69 dB.

The MC 910 is suitable as a main microphone for stereo and surround recordings as well as close miking of voice or individual instruments. Its subtle treble boost provides an open and natural sound even with larger distances. It also compensates for off axis high frequency attenuation of the omnidirectional capsule. Due to the switchable pre-attenuation of 15 dB it is suitable for use with very high sound pressure levels. The switchable low-cut filter with 6 dB/octave below 250 Hz provides a reproducible audio variant.

With the WS 101 wind shield, the MC 910 can be used for speech and vocals. The MC 910 is phantom powered (11 - 52 V) and therefore suitable for live or studio applications.

Omnidirectional polar pattern

Switchable pre-attenuation -15 dB

Switchable bass roll-off filter with 6 dB/Octave at 250 Hz

Slight treble boost on axis

Transducer type: True condenser

Operating principle: Pressure

Frequency response: 30 - 20,000 Hz

Polar pattern: Omnidirectional

Open circuit voltage at 1 kHz (0 dB = 1 V/Pa): 25 mV/Pa = -32 dBV

Nominal impedance: 180

Load impedance: 1000

Max. SPL at 1 kHz: 127 dB

with pre-attenuation: 142 dB

Signal-to-noise ratio rel. to 1 Pa: 69 dB

A-weighted equivalent SPL: 18 dB

Low-cut filter: switchable, 6 dB/octave at 250 Hz

Power supply: 11 - 52 V phantom power

Current consumption: 4.6 mA

Connector: 3-pin XLR male

Dimensions:

Length: 128 mm

Diameter: 21 mm

Weight without cable: 115 g