The Beyerdynamic TGV 96c is a premium true condenser microphone (cardioid) for vocals. It as a optimal sound due to multi-layer metal gauze on the upper grill.
Every comparison needs a reference - data, specifications, properties that can be measured against. For the vocal microphones of the Touring Gear series, the TG V96c true condenser microphone - the benchmark for live vocals assumes this role.
The strength of the TG V96c lies in its absolutely faithful reproduction - even of the finest nuances and on stage every detail counts. The microphone's exterior stands out for its sophisticated design, with a special coated surface that is pleasant to the touch. But it is what's inside that makes the TG V96c into a topclass microphone and makes it stand out with vocalists, professional rental companies and sound technicians: this real condenser microphone shines with a captivatingly natural sound. The subtle treble boost provides an open, finely detailed and nobtrusive sound pattern.
Further advantages: the TG V96c can be operated with phantom powering down to 11V without affecting the performance. The 5-layer pop protection made from metal gauze of differing mesh sizes and a sintered plate optimally suppresses plosives while significantly improving the rear-attenuation.
The TG V96c is rugged enough for the stage and is supplied with an individual frequency response curve print out. Handcrafted in Germany.
High-quality vocal microphoneFrequency-independent cardioid polar patternCompensated proximity effecttWire mesh basket without foamShock mounted microphone transducer and electronics
Transducer type: CondenserOperating principle: Pressure gradientPolar pattern: CardioidFrequency response: Close miking: 20 - 20,000 HzDistant miking (measured at 1 m): 55 - 20,000 HzOpen circuit voltage: 4 mV/Pa (-48 dBV) ±2 dBNominal impedance: 60Load impedance: 1 kMax. SPL at 1 kHz: 150 dBSignal-to-noise ratio: 64 dB [CCIR, Q-Peak]Equivalent SPL: 20 dB [A, RMS]In-phase rejection 50 - 20,000 Hz: 60 dBPower supply: Phantom power: 24 - 48 V (recommended: 48 V)Current consumption: 4.3 mAConnection: 3-pin male XLR,1 = ground2 = +3 = -DimensionsLength: 185 mmShaft diameter: 26 mmHead diameter: 48 mmWeight: 330 g