The Micro Clock MKIII XB is a very accurate word clock with only 0.6pS RMS of jitter at the BNC outputs. It has less than one third of the jitter of the standard Micro Clock MKIII!
It boasts incredibly accurate crystal oscillators and superior quality galvanic isolation, both of which contribute to the extraordinarily low jitter measurement.
Its small form factor has the ability to drive up to 1,000 feet of coaxial cable and it is suitable for improving the conversion quality of an audio interface. It can sync all of your digital gear together, even if it's located in different rooms, or different buildings. Full- and 1/2-rack removable rack ears are also included.
Ultra-low jitter, harmonically-enhanced word clock signal generation8 selectable sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4kHz, 192 kHz, 352.8 kHz, and 384 kHz6 BNC outputs with dedicated output drivers for maximum isolation
Jitter: 0.6 pS RMS (BNC outputs)Outputs: 6 x BNC, 1 x XLR AES, 1 x RCA S/PDIF, 1 x optical S/PDIF (recommended max. cable length = 3.3' (1 m)BNC: 75 Ohms, 5 V unterminatedRCA: S/PDIF: 75 Ohms, unbalancedAES: 110 Ohms, balancedClock Frequency: BNC: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz RCA S/PDIF & AES: 44.1, 48, 88.2, 96, 176.4, 192 kHz
Optical S/PDIF: 44.1, 48, 88.2, 96 kHz
Power: 9 VDC (6 W power consumption)Power Connector: 2.1 mm barrel connector with 5.5 mm outer diameter, center-pin positiveDimensions (L x W x H): 6.5 x 6 x 1.75" (17 x 15 x 4.4 cm)Weight: 4 lb (1.8 kg)
GTIN (UPC/EAN) : 700254867199
Manufacturer Part Number : MICROCLOCKMK3XB