The Bryston PowerPAC 300 is a perfect choice for use as a portable power amplifier which can be attached directly to the rear of your loudspeaker. 300W into 8 Ohms.
This provides for the use of very short speaker leads resulting in a much improved loudspeaker/amplifier interface.
The PowerPac is a perfect choice for use as a modular power amplifier which can be attached directly to the rear of your loud- speaker . It can also be bolted on the wall, or in the wall, for utilization in audio/video sur- round systems (left/right/center/rears) where a non-conspicuous power module is required. Another application would be in multi-room audio systems where single or multiple ampli- fiers are needed to provide music to other rooms.
Mountable directly on loudspeakers or adjacently on a wall
Regulated power supplied to all voltage gain stages
Balanced or unbalanced input selection via switch
Gold plated connectors
Power clipping indicator
23dB or 29dB (Balanced)
IM or THD at nominal output power < 0.007% from 20Hz to 20kHz
>106dB below rated output
<1 Hz to over 100 kHz
Unbalanced 1.5 Volts in = 250 watts at 8 Ohms