Désolé, le produit DirectOut Technologies Andiamo 2 SC/SC n'est malheureusement plus disponible sur le site de Studio Economik.

Intéressé(e) par d'autres produits de la catégorie Équipement d'enregistrement?

Voulez-vous voir les autres produits disponibles pour DirectOut Technologies?
Voici quelques suggestions qui pourraient vous intéresser;

Information

The DirectOut Technologies ANDIAMO 2 SC/SC is a MADI AD/DA converter for 32 audio channels from analog to digital and from digital to analog.

Its sophisticated hardware design offers minimal dimensions and maximum reliability. Simultaneous conversion of 32 audio channels from analog to digital and from digital to analog in 1 HU make efficient use of valuable rackspace.

Caractéristiques

Quick overview
The front panel provides status LEDs for 32 all channels for a quick check of signal status (signal present, over) of all input and output channels.

Cascading
Bank selection allows to choose the processed audio channels of a MADI stream - 1 to 32 or 33 to 64. Cascade two units for conversion of up to 64 audio channels.

Individual Routing & Remote Operation
A Matrix Mode offers free signal routing on a per channel basis. The routing matrix is accessed via the ANDIAMO remote software. There are different methods available for remote connection:

- Serial control via USB
- Serial over MADI (embedded RS-232 data)
- MIDI over MADI (embedded MIDI data)

Safe operation
ANDIAMO 2 offers highest reliability through two phase redundant power supplies with inlets and switches on the rear panel.
ANDIAMO 2 is equipped with two MADI ports and provides port redundancy and flexibility.

Clocking
ANDIAMO 2 can be clocked by word clock, MADI input or internally. The system clock is provided at the word clock output at any time.

Adaption
The sensitivity of the converter may be switched between two levels (hi/lo) - discrete for A/D and D/A. Select one of three different versions when ordering ("configure to order"):

- Version "A": +06 dBu / +15 dBu
- Version "B": +09 dBu / +18 dBu
- Version "C": +15 dBu / +24 dBu

Spécifications

Applications
ANDIAMO 2 can be used for conversion, monitoring and recording
of analog signals.

Typical applications include:
  • monitoring digital audio
  • recording line signals
  • conversion of a high number of channels from analog to digital and vice versa
  • redundant recording using both MADI I/Os
  • format conversion of MADI signals

  • Technical Data :
    MADI Ports (I/O) : 2 x SC-Socket multi-mode or 1 x SC-Socket multi-mode & 1 x coaxial BNC, 75
    Analog (I/O) : 8 x DSUB-25, balanced (TASCAM pinout)
    Analog level (I/O) : +6 dBu / +15 dBu (digitally switchable) or +9 dBu / +18 dBu (digitally switchable) or
    +15 dBu / +24 dBu (digitally switchable)

    A/D
    SNR : -115,5 dB RMS (20 Hz - 20 kHz) / -118 dB(A)
    THD @ -1dBFS : -113 dB
    Frequency Response : -0,15 dB (10 Hz) / -0,15 dB (20 kHz)

    D/A
    SNR : -113,5 dB RMS (20 Hz - 20 kHz) / -116,5 dB(A)
    THD @ -1dBFS : -100 dB
    Frequency Response : -0,5 dB (10 Hz) / -0,15 dB (20 kHz)

    Global
    Word clock : coaxial BNC (75 termination switchable)
    USB : USB 2.0 for firmware updates and remote control
    Sample rates : 44.1, 48, 88.2, 96 kHz (+/- 12,5%)
    MADI formats : 48k / 96k Frame, 56 / 64 channel, S/MUX
    Power supply : 2 x 84 V to 264 V AC / 47 Hz to 63 Hz / safety class 1, phaseredundant
    Dimensions : Width 19'' (483 mm), Height 1 HU (44,5 mm), Depth 10'' (254 mm)
    Weight: about 3 kg
    Maintenant offert
    Financement disponible
    Aimez-nous
    Suivez-nous
    ©2004-2024 - Studio Economik Inc.® Tous droits réservés.