The mic is a phantom powered (P48) close miking specialist with an extremely linear on-axis response in an extended frequency range from 10 Hz to 40 kHz (±2 dB).

This microphone is suitable for a wide range of applications from AB stereo pair to close-miking tasks as well as measurement requirements.

The microphone capsule
This high-performance condenser omni mic has an unbeatable dynamic range of 124 dB from the noise floor to 1% THD. It is capable of handling up to 160 dB SPL peak before clipping occurs.

It has, through its total acoustical transparency and ultra-high SPL handling capability, gained a reputation as being the first choice for picking up drums, percussion and brass instruments, whenever a natural and non-distorted result is paramount.

Due to its linear qualities and perfect omnidirectionality, it is also used as reference microphone in both microphone comparisons and acoustic test equipment.

A truly flexible range
The MMC4007 Capsule is part of the flexible d:dicate? Microphone series. The MMC4007, with the MMP-A preamplifier, is a legendary high-SPL recording and calibration classic with natural tone and dynamics. The MMC4007, with the MMP-C compact preamplifier, provides neutral sonic and visual design with linear response in extended frequency bandwidth.

At any time, and with no tools needed, it is possible to transform the d:dicate? 4007A Omnidirectional Microphone, 12 mm into a new configuration. You can combine it with another d:dicate? or d:facto? Microphone Capsule or Preamplifier.

Neutral, precise and versatile

Linear response up to 40 kHz

Unbeatable dynamic range

Extreme SPL handling up to 160 dB

Recording and measuring reference

Close-miking

Modular flexibility

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 10 Hz - 40 kHz
Frequency range, ± 2 dB: 10 Hz - 40 kHz
Sensitivity, nominal +/- 2 dB at 250 Hz: 9 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 24 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 36 dB (max. 38 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 70 dB(A)
Total Harmonic Distortion (THD): < 0.5 % up to 142 dB SPL peak
Total Harmonic Distortion (THD): < 1 % up to 148 dB SPL peak
Dynamic range: Typ. 124 dB
Max. SPL, peak before clipping: 160 dB
Switchable attenuator, filters etc.: 0 dB / -20 dB
Output impedance: 200 Ohms
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 60 dB
Power supply: 48 V Phantom power (±- 4 V)
Current consumption: 2.8 mA

Connector: XLR-3M

Pin 1: shield

Pin 2: signal + phase

Pin 3: - phase

Color: Matte black
Weight: 163 g (5.7 oz)
Microphone diameter: 12 - 19 mm (0.47 - 0.75 in)
Capsule diameter: 12 mm (0.47 in)
Microphone length: 170 mm (6.7 in)
Maximum output voltage: 7 V
Polarity: +V at pin 2 for positive sound pressure
Temperature range: -40 °C to 50 °C (-40 °F to 122 °F)
Relative Humidity (RH): Up to 90%
Matching tolerance (frequency response and sensitivity): ± 0.5 dB
Phase deviation for kit: < 5°