The 4066-OP-A-F03-LH is a beige CORE+ omnidirectional headset microphone equipped with a 3-pin LEMO connector, crafted for professional use in broadcast, live theater, and corporate AV settings. Its neutral beige color offers a natural, low-profile appearance, making it ideal for performers and presenters seeking both invisibility and exceptional audio performance.
This headset features DPA's advanced CORE+ technology, delivering outstanding vocal clarity, minimal distortion, and an extended dynamic range that captures every nuance-even at high SPLs. The dual-ear design ensures a secure, comfortable fit for extended wear, with a flexible boom arm that can be positioned on either side of the face. Designed for durability in the most demanding environments, the 4066-OP-A-F03-LH incorporates a double-vent protection system and water-resistant materials to withstand humidity, sweat, and rigorous stage conditions.
Caractéristiques
Natural, Detailed Audio: Captures voice with clarity and balance, ideal for live speech and performance.
CORE+ Technology Built-In: Minimizes distortion and enhances dynamic range for reliable, high-quality sound.
3-Pin LEMO Connector: Offers a secure and professional connection with compatible wireless systems.
Resistant to Sweat and Moisture: Double-vent protection and water-resistant components ensure performance in challenging conditions.
Adjustable Boom Design: Boom arm can be placed on either side for user comfort and optimal mic positioning.
Beige Finish for Discreet Use: Ideal for on-stage or broadcast environments where visibility should be minimal.
Spécifications
Model
4066-OP-A-F03-LH
Microphone Type
Omnidirectional headset microphone
Pressure operation principle
Pre polarized condenser capsule
Frequency Response
20Hz to 20kHz
Soft boost grid 40Hz to 20kHz with 3dB boost at 8 to 20kHz
High boost grid 40Hz to 20kHz with 10dB boost at 12kHz
Sensitivity and Noise
Sensitivity 6mV per Pa minus 44dB re 1V per Pa
Equivalent noise level A weighted typically 26dB A max 28dB A
Equivalent noise level ITU R BS.468 4 typically 38dB max 40dB
Distortion and SPL Handling
THD less than 0.5 percent up to 133dB SPL RMS 136dB SPL peak
THD less than 1 percent up to 136dB SPL RMS 139dB SPL peak
Max SPL at 10 percent THD 144dB SPL peak
Dynamic range typically 111dB
Impedance and Connectivity
Rated output impedance 30 to 40 ohms
Cable drive capability up to 300 meters with DAD6001 BC XLR adapter
Connector type 3 pin LEMO
Power Requirements
Wireless systems 5V to 10V through DPA adapter
With DAD6001 BC P48 phantom power or will work from 12V
Current consumption typically 1.5mA microphone 3.5mA with DAD6001 BC
Physical Specifications
Weight 14 grams including cable and connector
Microphone diameter: 5.4mm
Cable length: 1.2 meters
Cable diameter: 1.6mm
Color: beige
Environmental
Temperature range minus 40 to 45 degrees Celsius
Relative humidity up to 90 percent
Design Features
Detachable mic boom for left or right side configuration
Double vent protection system with drop stopper
Water resistant internal construction
CORE plus technology for distortion neutralization across dynamic range
Microphone polarity positive pressure gives positive voltage on LEMO pin
