CORE plus mic, loud SPL handling, 145 dB peak, supercardioid pattern, MicroLock connector, guitar clip included, high isolation, natural detailed tone
The DPA 4099-DP-1-199-G CORE+ microphone is engineered for superior instrument miking, tailored specifically for guitar and similar stringed instruments. Outfitted with DPA's CORE+ technology, this Loud SPL version handles sound pressure levels up to 145 dB without distortion, capturing every nuance of your instrument with remarkable clarity and dynamic range.
This model includes the GC4099 clip, designed for precise, stable mounting on acoustic guitars and other fretted instruments. The discreet, lightweight microphone attaches seamlessly, allowing full freedom of movement without compromising sound quality or instrument finish. Its supercardioid polar pattern ensures focused pickup and outstanding isolation from ambient noise and other stage sounds.
The 4099-DP-1-199-G blends high-fidelity audio capture with practical, gig-ready flexibility. Whether on stage or in the studio, it faithfully reproduces the rich, natural tone of your instrument-making it a go-to mic for professional guitarists and sound engineers alike.
Caractéristiques
Premium clip-on microphone designed specifically for acoustic guitar and similar instruments
CORE+ technology delivers clear, natural sound with expanded dynamic range and low distortion
Loud SPL version handles high sound pressure levels without clipping or harshness
Supercardioid pickup pattern ensures excellent isolation from stage noise and other instruments
Includes specialized guitar clip for secure, gentle mounting with precise positioning
Flexible gooseneck and compact design provide easy mic placement without affecting playability
MicroLock connector ensures reliable cable attachment and compatibility with wireless systems
Ideal for live performance, recording sessions, or amplified acoustic sets
Spécifications
Microphone Type
Prepolarized condenser
Pressure gradient operation
Polar Pattern
Supercardioid
Frequency Response
20 Hz to 20 kHz
Effective range plusminus 2 dB at 20 cm: 80 Hz to 17 kHz with 2 dB soft boost at 10 to 12 kHz
Sensitivity
6 mV per Pa
Minus 44 dB re 1 V per Pa
Equivalent Noise Level
Typical 23 dBA
Maximum 26 dBA
Distortion THD
Less than 0 point 5 percent: 135 dB SPL RMS, 138 dB SPL peak
Less than 1 percent: 138 dB SPL RMS, 141 dB SPL peak
Max SPL at 10 percent THD: 145 dB SPL peak
Dynamic Range
Typical 118 dB
Output Impedance
MicroLock: 30 to 40 ohm
With DAD9099 or DAD9001 XLR Adapter: 100 ohm
Cable Drive Capability
Up to 300 meters with XLR adapter
Output Balance
Balanced signal with XLR adapter
CMRR
Greater than 60 dB from 50 Hz to 15 kHz
Power Requirements
Wireless: 5 to 10 V via DPA adapter
Wired: P48 phantom power, minimum 12 V
Current Consumption
1 point 5 mA for microphone
3 point 5 mA with XLR adapter
Connector
MicroLock
Mount Type
GC4099 Guitar Clip
Clip weight: 12 g
Dimensions
Microphone diameter: 5 point 7 mm
Microphone length: 50 mm
Gooseneck length: 140 mm
Cable length: 1 point 8 meters
Cable diameter: 1 point 6 mm and 2 point 2 mm
Weight
Microphone: 18 g
Environmental
Operating temperature: minus 40 to 45 Celsius
Relative humidity: up to 90 percent
Polarity
Positive voltage at MicroLock pin for positive sound pressure
Identification
Red marking on gooseneck for Loud SPL
Technology
CORE Plus
MicroLock connector
IP58 certified
Enhanced shock mount and gooseneck stability
Designed for accurate guitar reinforcement with superior isolation and clarity
