The 4188 Earset Mic combines the sound of the 4088 directional capsule and a lightweight and flexible one-ear earset. It can be used when miking needs to be fast, easy, and where the person wearing the microphone won't feel the presence of it such as in conference, speech and active live performance applications.
Caractéristiques
Pristine audio quality
Lightweight and flexible
Easy mounting to the left or right
Minimal visual impact
Resistant to humidity
Flexible adapter system fits most professional wireless systems
Spécifications
Directional pattern: Cardioid
Principle of operation: Pressure gradient
Cartridge type: Pre polarized condenser
Frequency response: 20 Hz to 20 kHz
Sensitivity nominal ±3 dB at 1 kHz: 6 mV per Pa -44 dB re 1 V per Pa
Equivalent noise level A weighted: Typically 26 dB A re 20 uPa maximum 28 dB A
Equivalent noise level ITU R BS468-4: Typically 38 dB maximum 40 dB
Distortion THD less than 1 percent: 134 dB SPL RMS 137 dB SPL peak
Dynamic range: Typically 111 dB
Max SPL THD 10 percent: 144 dB SPL peak
Rated output impedance: From MicroDot 30 to 40 ohms from DAD6001-BC 100 ohms
Cable drive capability: Up to 300 meters with DAD6001-BC XLR Adapter
Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio CMRR: Greater than 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply for full performance: For wireless systems minimum 5 volts to maximum 10 volts through DPA adapter
With DAD6001-BC P48 phantom power operable from 12 volts
Current consumption: Typically 1.5 mA microphone 3.5 mA with DAD6001-BC XLR Adapter
