DPA 4188-DP-F-F10-LH
4188 CORE+ Directional Flex Headset Mic, 120 mm Boom, Beige, TA4F Mini-XLR
The DPA 4188 CORE+ Directional Flex Headset Microphone in beige, featuring a 120 mm boom and TA4F Mini-XLR connector, combines subtle appearance with exceptional sound quality. Perfect for presentations, theatrical performances, and broadcast, this one-ear headset offers secure comfort and a nearly invisible profile against light skin tones.
Powered by CORE+ technology, it delivers ultra-low distortion and precise audio across the entire dynamic range, ensuring natural voice reproduction even in high-SPL environments. The cardioid capsule focuses on the speaker's voice while minimizing ambient noise, making it ideal for challenging acoustic spaces. With a TA4F Mini-XLR connector, it integrates seamlessly with a wide range of wireless systems. Designed for professionals who need discretion, durability, and crystal-clear sound, this headset meets the highest standards for live vocal applications.
Features
Cardioid Directional Pickup: Focuses on the speaker's voice while reducing surrounding noise-ideal for speech and vocals.CORE+ Audio Technology: Delivers distortion-free, high-clarity sound with detailed and natural voice reproduction.Discreet Beige Finish: Designed to blend seamlessly with skin tones for minimal visibility in live or broadcast settings.120 mm Boom Arm: Allows precise mic placement near the mouth for optimal sound capture.TA4F Mini-XLR Connector: Compatible with popular wireless bodypack systems using 4-pin Mini-XLR.Performs Under Pressure: Handles high sound levels without distortion, suitable for energetic presentations or performances.Humidity and Sweat Resistant: Built for reliable use in active or high-moisture environments.Adjustable and Comfortable Fit: Lightweight, flexible one-ear design can be shaped for left or right ear use.
Specifications
General Specifications
Model: 4188 CORE PlusType: Directional Flex Headset MicrophoneBoom Length: 120 mmColor: BeigeMounting Style: Single-ear Flex EarsetConnector: TA4F Mini-XLRCapsule Type: 4088 directional capsule
Audio Performance
Directional Pattern: CardioidPrinciple of Operation: Pressure gradientCartridge Type: Pre-polarized condenserFrequency Response: 20 Hz to 20 kHzSensitivity: 6 mV/Pa, -44 dB re 1 V/PaEquivalent Noise Level A-weighted: Typically 26 dB(A), maximum 28 dB(A)Equivalent Noise Level ITU-R BS468-4: Typically 38 dB, maximum 40 dBDistortion THD less than 1 percent: 134 dB SPL RMS, 137 dB SPL peakMaximum SPL THD 10 percent: 144 dB SPL peakDynamic Range: Typically 111 dB
Electrical Characteristics
Output Impedance from MicroDot: 30 to 40 ohmsOutput Impedance with DAD6001-BC: 100 ohmsCable Drive Capability: Up to 300 meters with DAD6001-BC XLR adapterOutput Balance Principle: Signal balanced with DAD6001-BC XLR adapterCommon Mode Rejection Ratio: Greater than 60 dB from 50 Hz to 15 kHz with DAD6001-BCPower Supply via Adapter: Minimum 5 V, maximum 10 VPower Supply with DAD6001-BC: P48 phantom power, operational from 12 VCurrent Consumption: Typically 1.5 mA microphone only, 3.5 mA with DAD6001-BC
CORE Plus Technology
Distortion Elimination: Reduces nonlinearities from membrane and electronicsAudio Fidelity: Enhanced clarity and transparency across dynamic rangeTHD Benchmark: Less than 0.5 percentCompatibility: Interoperable with legacy DPA microphones
Physical Characteristics
Microphone Boom Weight: 0.8 gramsEarhook Weight: 1.1 gramsCable Weight: 6.6 gramsTotal Weight: 8.5 gramsMicrophone Diameter: 5.4 mmCable Length: 1.3 metersCable Diameter: 1.6 mm
Environmental
Operating Temperature Range: Minus 40 to 45 degrees CelsiusRelative Humidity: Up to 90 percentElectromagnetic Compatibility: Fully compliant
Application Suitability
Designed for conference, broadcast, performance, and theater useLightweight and comfortable for extended wearCan be mounted on either earCompatible with wireless systems using TA4F Mini-XLR connector
Write a review about the DPA 4188-DP-F-F10-LH
View more products from
DPA
