The mic features the legendary d:screet? 4061 Miniature Omnidirectional Capsule in a soft rubber necklace.

This d:screet? Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians. It is, for example, the perfect choice for a reality show setting.

With low noise and high sensitivity, the d:screet? Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 154 dB peak before clipping. It has a linear response, low distortion and a large dynamic range. This necklace mic sounds great no matter the application.

The mic comes in three colors: black, white and brown. It is available in two lengths: 47 cm (18.3 in) or 53 cm (20.9 in).

Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.

The d:fine?, d:screet? and d:vote? series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones' ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.

Necklace Length: 53
Colors:

Black - SCO61B00-N53

Brown - SCO61F00-N53

White - SCO61W00-N53

Termination:

3-pin Lemo: SCO61X03-N53

TA4F Mini XLR: SCO61X10-N53

Mini-Jack: SCO61X34-N53

Plug and play mounting

Consistent output

Minimal visual impact

Modular adapter system fits most professional wireless systems

Directional pattern: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, ±2 dB: High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
Total harmonic distortion (THD): < 1% up to 123 dB SPL peak
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: From MicroDot: 30 - 40 . From DAD6001: 100
Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector: 3-pin Lemo, TA4F Mini XLR, Mini-Jack.
Color: Black, brown or white
Weight: 17 g (0.04 oz) incl. Cable and MicroDot connector
Microphone diameter: 5.4 mm (0.21 in)
Microphone length: 47 cm (18.5 in) / 53 cm (20.7 in)
Cable length: 1.2 m (3.9 ft)
Cable color: Black, beige or brown
Cable diameter: 1.6 mm (0.06 in)
Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Temperature range: -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH): Up to 90%