Sorry, the product DPA SCO61XZZ-S is not available anymore on Studio Economik's website.

Interested in other Microphones products?

Do you want to see other DPA products?
We have a few suggestions you could be interested in;

Information

If you need to couple complete invisibility with amazing sound, the d:screet? Slim 4061 Omnidirectional Microphone, is exactly what you are looking for. With Termination.

This mic is perfect for your film assignment or for any other situation where you need a completely hidden microphone. The d:screet? Slim 4061 Omnidirectional Microphone is flat and short with a cable that runs perpendicular to the sound inlet, ensuring easy mounting and a tiny footprint. When used with the detachable Button-Hole Mount or Concealer, it becomes completely invisible. With sound on par with DPA's classic d:screet? Omnidirectional Miniature Microphones, you can be sure that the d:screet? Slim will not disappoint.

Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.

The d:fine?, d:screet? and d:vote? series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones' ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.

Colors:
  • Black: SCO60B00-S
  • Brown: SCO60C00-S
  • Beige: SCO60F00-S
  • White: SCO60W00-S

  • Terminations:
  • 3-pin Lemo: SCO60X03-S
  • TA4F Mini XLR: SCO60X10-S
  • Mini-Jack: SCO60X34-S
  • Features

  • Pristine audio quality
  • Completely invisible when used with Button-Hole Mount or Concealer
  • Adapts to all pro wireless systems
  • Specifications

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz - 20 kHz
  • Frequency range, ±2 dB: 20 Hz - 20 kHz, 3 dB soft boost at 5 - 20 kHz
  • Button-hole mount: 20 Hz - 18 kHz, 5 dB soft boost at 5 - 18 kHz
  • Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 71 dB(A)
  • Total harmonic distortion (THD): < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
  • Dynamic range: Typ. 97 dB
  • Max. SPL, peak before clipping: 144 dB
  • Output impedance: From MicroDot: 30 - 40 . From DAD6001: 100
  • Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
  • Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
  • Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
  • Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems, 48 V phantom power ±4 V with DAD6001 XLR adapter
  • Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
  • Connector: MicroDot
  • Color: Black, beige, brown or white
  • Weight: 8.5 g (0.3 oz) incl. Cable and MicroDot connector
  • Cable length: 1.8 m (5.9 ft)
  • Cable color: Black, beige or brown
  • Cable diameter: 1.6 mm (0.06 in)
  • Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
  • Temperature range: -40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH): Up to 90%
  • Now accepting
    Financing available
    Like us
    Follow us
    ©2004-2024 - Studio Economik Inc.® All Right Reserved.