The Dynaudio M3P is a passive, 3 way (five drivers) main-monitor for demanding engineers.

Designed for continuous high power operation in a correctly constructed acoustic space, the M3 represents the fruit of a research and development program aimed at elevating main monitors above the realm of modified PA speakers. A pair of 300mm bass drivers are perfectly complemented by two 150mm piston midrange drivers employing massive 75mm coils. High frequencies are accommodated by a high power version of the 28mm ESOTAR T-330 DA dome tweeter, which enjoys a reputation as the finest dome tweeter available. All drivers are ferrofluid cooled, a benefit only made possible on low frequency drivers by the use of custom designed ferrofluid compounds applied to very tightly tolerated voice coil gaps - a feature absolutely unique to Dynaudio Acoustics.

The result is a very clean, dynamic and powerful speaker in which common problems, such as cone break up, thermal compression and phase misalignment have been almost eliminated. Frequency response is full and flat, and the overall transparency of sound leaves no doubt that the M3 truly advances the art of monitoring at high levels without sacrificing quality at more relaxing volume.

Levels from 85 to 120dBA exhibit essentially identical timbre allowing total confidence in mix decisions regardless of monitoring level.

Passive or Active
The M3 Main Monitor is available in both Passive and Active versions. Both versions employ the same sophisticated impedance corrected passive crossovers between midrange drivers and tweeter. The Passive version has internal links for simple adjustment of low frequency levels, and is primarily intended for user installation on rigid stands within a control room, although soffit mounting is entirely feasible. The bi-amped Active system uses an active external crossover offering full equalization capabilities together with dual-band electronic driver protection.

Unique linear phase and frequency response

Every monitor matched to any other monitor within ± 1.5dB

28mm ESOTAR soft dome tweeter with aluminum voice coil

Dual 150mm magnesium silicate impregnated polypropylene (MSP) midrange drivers with 75mm voice coils

Dual 300mm polypropylene bass drivers with exceptionally large 100mm aluminum voice coils

offering dramatic improvements in power handling, bass response and distortion figures over conventional systems

Gold plated professional binding posts accepting heavy-gauge speaker cable

Heavy internal damping for minimum cabinet resonance.

Thermal protection of the tweeter

Model
M3P


System
3-way Passive Main Monitor


Frequency Response
(+/- 3 dB)
30 Hz - 20 kHz


Peak SPL 1m, pair
(IEC Short Term)
> 129 dB peak


Peak SPL 2m, 5.1
(IEC Short Term)
> 130.5 dB peak


Amplifier minimum
140 W (> 100 dB SPL @ 2.5m)


Sensitivity (2.83 V/1m)
90 dB


Impedance, Nominal
4 ohm


Impedance, HF (200 kHz)
5.9 ohm


Resonance Frequency
38 Hz


Internal Cabinet Volume
145 liters


Bass Principle
Bass reflex


Crossover Frequencies
600/3700 Hz


Crossover Slope
Woofer 12 dB/oct; Midrange 12 dB/oct; Tweeter 18 dB/oct


Tweeter
Esotar 28 mm/1.1" soft dome, Magnetic fluid, Rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front


Midrange
2x145 mm/5.7" One-piece molded


Woofer
2x300 mm/12", One-piece molded polyprop cone, 100 mm/4" pure alu wire voice coil


Weight
55.0 kg / 121.3 lbs


Dimensions (WxHxL)
555 x 775 x 505 mm /