MPN #M3VE/LEFT    

$12799.00

Financing available
Free shipping in Canada. Conditions

Studio main systems with bi-amped, dual 12" ESOTAR woofers, dual 6" midrange drivers, 1.1" ESOTAR soft-dome tweeter, aluminum voice coil, Left speaker



The Dynaudio Professional M3VE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor. Two speakers are powered by a single four channel Lab.gruppen PLM 12k44 amplifier, using the integrated Lake active cross-over between LF and MF, while passively filtering the MF/HF cross-over point.

With Dynaudio ESOTAR² driver technology, M3VE takes over where most other monitor systems give up. Attention to detail, underpinned by a 22Hz - 21kHz frequency response and beyond 133dB SPL, M3VE leaves no room for desire in terms of resolution, range or power.
  • Unique linear phase frequency response
  • Frequency Response: 20Hz - 25kHz
  • Dual 12" ESOTAR² Woofers, aluminum voice coil
  • Dual 6" Midrange drivers, MSP cone, 75mm aluminum voice coil
  • 1.1" (28mm) ESOTAR² Soft-dome tweeter, aluminum voice coil
  • Max. SPL (short term peak @ 1m): 133 SPL
  • Heavy internal damping for minimum cabinet resonance
  • Available in Left and Right
  • System: 3-way Active Main Monitor
    Frequency Response (+/- 3 dB): 22 Hz - 21 kHz
    Peak SPL 1m, pair (IEC Short Term): > 133 dB peak
    Amplifier minimum: 2 x Lab.gruppen PLM10000Q
    Resonance Frequency: 24 Hz
    Internal Cabinet Volume: 145 liters
    Bass Principle: Bass reflex
    Amplifier: 1/2 Lab-gruppen PLM10000Q (2 channels pr speaker). Preset: M3VE V05
    Tweeter: Esotar² 28 mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
    Midranges: 15 cm with 75 mm diameter pure aluminum wire voice coil, one-piece molded MSP cone
    Woofer: Esotar 30 cm with 75 mm diameter pure copper wire voice-coil, MSP-cone, long stroke
    Weight: 65 kg
    Dimensions (WxHxL): 555 x 775 x 505 mm
    Cabinet: 25mm MDF, strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer.
    Crossover: Woofers/hightone: active dsp-based, in-amp Lake processor. Midrange/tweeter: passive wir air-coils only, low dielectrium capacitors and zero-compression resistors.
    View more products from Dynaudio
    Dynaudio Logo
    Now accepting
    Financing available
    Like us
    Follow us
    ©2004-2021 - Studio Economik Inc.® All Right Reserved.