Choir microphones have always presented a unique design and installation challenge - the traditional solution is to use an angle guide on the microphone's lead to aim towards the performance venue. The problem with this approach is that either a very small microphone had to be used to keep aimable weight within practical limits - or locate the microphone's electronics at some considerable distance from the element - inviting losses and noise. The ChoirMic? Series solves all of these problems. Our hanging choir microphones provide pristine audio quality without spotlighting and more gain before feedback while picking up almost no sound from the rear of the microphones. They are ideal for miking choirs and orchestra or band in front of the choir.

30kHz flat frequency response

No spotlighting

Uniform frequency response on or off axis

More gain before feedback

Picks up almost no sound from the rear of the microphone

Electronics housed in microphone

Prevents RFI

Mini-gooseneck allows quick and easy positioning

Comes with 30 foot balanced, twisted pair Canare cable

Available in black and white

Custom cable lengths available

Frequency Response: 30Hz to 30kHz ±2dB at 12 inches (30.5cm)

Polar Pattern: Cardioid

Sensitivity: 20mV/Pa (-34dBV/Pa)

Power Requirements: 48V Phantom, 10mA

Max Acoustic Input: 139dB SPL

Output: XLR (pin 2+)

Output Impedance: 65 balanced (between pins 2 & 3)

Min Output Load: 600 between pins 2 & 3

Noise: 16dB SPL equivalent (A weighted)

Dimensions L x D: 324mm x 22mm (12.75 x .860 inches)

Attached Cable: 30 feet (9.14m) Canare Star Quad

Weight: .22 lb. (100g) microphone only

1.2 lb (544.3g) microphone with 30 cable