This model is composed of a 8" (21cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port and of a 1" (25mm) aluminum inverted dome tweeter. It features a 40W amplifier for the tweeter and a 100W amplifier for the woofer, and has a frequency response of 35Hz to 22kHz (+/- 3dB).

Low directivity: keeps the same sound throughout the room

Damping and rigidity: neutrality, no distortion

Tonal balance is identical at low and high volumes, low sensitivity to the wall effects

Connect up to 2 audio sources

Optimal acoustic integration

Reduced power consumption

Frequency response (+/- 3dB): 35Hz - 22kHz
Power: 140W (100W+40W)
Maximum SPL: 109dB SPL (pic @ 1m)

Electronic section
Inputs Connectors

XLR balanced 10kOhms

RCA unbalanced 10kOhms with sensitivity compensation

LF amplifier stage: 100W, class AB
HF amplifier stage: 40W, class AB

Standby mode
Standby

After about 30 minutes without using the monitor

Activation of the monitor by signal detection >3mV

Power supply (The voltage can not be modified)

220-240V (fuse T1.6AL/250V)

or 100-120V (fuse T3.15AL/250V)

Connection: IEC inlet and detachable power cord

User Controls
Sensitivity: Adjustable, 0 or +6dB
LF shelving (0 - 300Hz): Adjustable, +/-6dB
HF shelving (4.5 - 22kHz): Adjustable, +/-3dB
Power ON/OFF: Switch on rear panel
Standby mode power consumption: < 0,5W
Indicators: Power ON/OFF LED - Standby LED

Transducers
Woofer: 8" (21cm) drive unit - Polyglass cone
Tweeter: 1" (25mm) drive unit, Aluminium inverted dome

Cabinet
Construction: 0.6" (15mm) MDF
Finish: Vinyl and Black painting

Dimensions
with 4 rubber pads (HxWxD): 15.6x11.3x13.7" (397 x 287 x 348mm)
Weight: 28.2lb (12.8kg)