Essentially, the Trio6 Be is a three-way speaker with a 1" tweeter, a 5" woofer, and an 8" subwoofer. Yet, switching to FOCUS mode reconfigures Trio6 Be in two-way monitor.
The Trio6 Be was designed to meet the standards of the most demanding engineers. This dual monitor is the new reference in its price range owing to its extreme neutrality, its precise stereophonic imaging, and its ability to resolve the most minute sonic details, while its Class G amplifiers deliver SPL levels to suit all musical styles.
1" tweeter, a 5" woofer, and an 8" subwoofer
When utilised to its full potential, the Beryllium tweeter reaches up to 40kHz and the 8" subwoofer extends low frequencies down to 35Hz. This offers engineers complete control of the audio signal.
The 8" W composite sandwich cone subwoofer is complemented by its large port integrated into the front baffle, making it easy to position the monitor near the front wall without saturating the ports and maintaining excellent low-frequency linearity. Its large front port guaranties consistent performance regardless of SPL levels. It also allows a positioning closed to a wall without wall boost effect, allowing an easy integration even in small rooms.
The 5" W composite sandwich cone woofer is installed in an isolated chamber within the cabinet that prevents the sympathetic activation of its other speakers while optimising its acoustic performance. Two front-facing ports provide bass reflex, enabling the woofer to perform identically in both two-way (90Hz - 2.5kHz) and three-way (250Hz - 2.5kHz) configurations.
The 1" pure Beryllium inverted dome tweeter provides numerous advantages, including wide dispersion, amazing frequency response linearity, quick dynamics, and unrivaled impulse response.
1" tweeter, a 5" woofer
As a two-way speaker, Trio6 Be employs only the 5" woofer and the tweeter, limiting frequencies to between 90Hz and 20kHz. This configuration provides the perfect compromise when checking the quality of the mix for playback systems with limited frequency response, such as TVs, PCs, cars, and portable speaker systems. The frequency response curve of the two-way configuration is identical, though less extended, to its three-way curve, allowing for a perfect comparison that preserves the stereo image. Focusing on this critical middle frequency range facilitates a good mix and enables the engineer to ensure that the levels are just right. A footswitch (not included) activates this configuration remotely from the listening position.
A ¼" input jack on the rear panel receives the trigger signal from a remote pedal, while a ¼" output sends a link to the input on a paired monitor.
Most singlebutton guitar amplifier footswitches are compatible.
Two monitors in one with remote switching: a quick and effective way to compare the mix translated to a compromised speaker systemWide uncompromised dynamics, linearity, and wide dispersion produced by Beryllium inverted dome tweeter: state-of-the-art speaker design and materialNeutral, distortion-free sound thank to W composite sandwich coneRotating baffle: facilitates both horizontal and vertical setupsSimplified room integration, thank to LF and HF shelving, 160Hz EQHigh SPL accommodates all musical styles (115dB peak @ 1m)FOCUS mode (two-way or three-way configuration): Remote pedal (not supplied)Low and high frequencies & 160Hz notch adjusting: three control knobs
3-way mode: 35Hz - 40kHz (+/- 3dB)2-way mode: (Focus) 90Hz - 20kHz (+/- 3dB)
3-way mode: 115dB SPL (peak at 1m)2-way mode: (Focus) 105dB SPL (peak at 1m)
Inputs Type /Impedance: Electronically balanced / 10KOhmsConnectors: XLRSensitivity: Adjustable, +4dBu ou -10dBv
Bass: 200W, class G
Midrange: 150W, class G
Treble: 100W, class AB
Main voltage: 230V (class T fuse 1.6A fuse rating) - 115V (class T fuse 3.5 A fuse rating)Wiring: Detachable IEC power cable
Indicators and controls (Rear panel)
Input sensitivity selector (+4dBu/-10dBV)Low frequency shelving (+/- 3dB from 35 to 250Hz)High frequency shelving (+/- 3dB from 4.5 to 40kHz)EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1)FOCUS input / FOCUS output
LED: Focus mode on, audio clipping and protection indicated by LED on front panel
8W647018" Focal driver with W composite sandwich cone
5W047015" Focal driver with W composite sandwich cone
TB8721" Focal pure Beryllium inverted dome tweeter
Structure: 22mm (0.86") reinforced panels
Finish: Dark Red natural Burr-ash veneering side panels, Black body
Dimensions including 4 rubber feet (HxWxD): 201/2" x 1015/16" x 143/16" (520 x 278 x 360mm)
Weight: 44 lbs (20 kg)
GTIN (UPC/EAN) : 3544058801624
Manufacturer Part Number : PL06TRIO01