Focusrite Rednet A16R
The Focusrite A16R is a 16 channels of Dante-networked A-D and D-A conversion, with network and PSU redundancy.
16x16 Analogue I/O With Dual PSUs
RedNet A16R is a 1U, 16x16 analogue line-level I/O interface for any Dante? audio-over-IP network. Featuring network and power supply redundancy, RedNet A16R is the ideal choice for providing analogue I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.
High-quality conversion with up to 119dB of dynamic range is provided through four rear-panel DB25 connectors while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. Word Clock I/O on BNC connectors allows external devices to clock to RedNet A16R, or alternatively allows A16R to act as a network clock grand master slaved to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.
16 channels of high-quality line-level analogue I/O24-bit precision Focusrite conversion up to 192kHz119dB dynamic range, flat from 20Hz - 20kHz, +/-0.15dBInternally balanced throughoutDante-based remote-controlled audio-over-IP connectivityDual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliabilityWord Clock I/O and DARS for increased flexibility plus an additional two channels of AES/EBU I/OAnalogue I/O to AES59 standard on DB25 connectorsComprehensive front-panel indicatorsSoftware-based routing and control - no hardware patching required
0 DBFS Reference Levels: +18 or 24dBu (switchable)Frequency Response: 20Hz - 20kHz ± 0.1dBTHD N: <-100dB (0.001) unweighted, 20Hz - 20kHz; -1dBFS inputEIN: -96dBu A-Weighted (typical)Signal-To-Noise Ratio: 120dB A-Weighted (typical)Converter Dynamic Range: 120dB A-Weighted (typical), 10Hz - 20kHz
0 DBFS Reference Levels Outputs: 18 or 24dBu (switchable)Frequency Response Outputs: 20Hz - 20kHz ± 0.1dBTHD N Outputs: <-100dB (0.001) unweighted, 20Hz - 20kHz; 23dBu inputNoise In Presence Of Signal: -94dBu A-Weighted (typical)Dynamic Range: 118 dB A-Weighted (typical)Converter Dynamic Range Output: 120dB A-Weighted (typical), 10Hz - 20kHz
Input To Output Or Input: <-100dB unweighted, 20Hz - 20kHz; 23dBu inputOutput To Input Or Output: <-100dB unweighted, 20Hz - 20kHz; -1dBFS input
DIGITAL INPUT SAMPLE RATE CONVERTERS
Sample Rate Range: 32kHz to 216kHzGain Error: -0.3dBDynamic Range Inputs: >138dBTHD N Inputs: <-130dB (0.00003)Latency: 11 to 45 samples (network and sample rate dependent)
Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bitClock Sources: Internal or from Dante Network MasterExternal Word Clock Range: Nominal sample rate ±7.5
REAR PANEL CONNECTIVITY
Line Inputs: 2 x DB-25 connectorsLine Outputs: 2 x DB-25 connectorsChannel Count: 2 x 2 AES/EBU channelsInput (Optional DARS): 1 x Female XLR (Switchable with analogue input channels 15 and 16 at quad rates)Output: 1 x Male XLR (Duplicate of analogue output channels 15 and 16 at quad rates)Word Clock Input: 1 x BNC 75O port (switchable termination)Word Clock Output: 1 x BNC 75O portPSU: 2 x IEC Inputs with retaining clips.Network: 2 x etherCON NE8FBH, also compatible with standard RJ45 connectors
FRONT PANEL INDICATORS
Primary PSU (A): Green LED. Illuminates when an AC input is applied and all DC outputs are presentSecondary PSU (B): Green LED. Illuminates when an AC input is applied and all DC outputs are presentPrimary Network: Green LED. Indicates that a network connection is present on primary port when in redundant modeSecondary Network: Green LED. Indicates that a network connection is present on secondary port when in redundant modeNetwork Locked: Green LED. When unit is network slave, shows valid network lockSample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4Pull Up/Down: Orange LED. Indicates that the unit is set to operate on a Dante pull up/down domainAES/EBU Signal Indicators: 2 I/O signal indicator LEDsClock Source: Orange LED for each
Redundant: Allows unit to connect to two independent networksSwitched: Connects both ports to integrated network switch allowing daisy-chaining
View more products from Focusrite