Focusrite Rednet X2P

UPC/EAN #815301006336 MPN #REDNET-X2P

$1799.00

Économisez 20%, Prix suggéré $2249.00

Financement disponible

Soyez le premier à écrire une évaluation

Livraison gratuite au Canada. Conditions

2x2 analogue I/O to Dante audio interface with 2x mic pres, headphone and line output, PoE supplied

RedNet X2P is a compact, portable and robust 2x2 Dante audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable - simply use a power over Ethernet switch or PoE injector. A local input mixer allows 'more me' monitoring control, while a control lockout mode ensures settings can not be changed when used remotely.

Rear panel XLR outputs offer level-controlled analogue outputs of up to 24dBu, while a front panel 1/4" connector provides a high-powered headphone output capable of driving both high and low impedance headphones. A pair of combination XLR/1/4" inputs allow the connection of mic, line or instrument level signals to the mic pres, which include Focusrite's acclaimed Air mode which emulates the sound of our classic input transformers. The top panel features an array of controls: output level for headphone and line outputs, mic pre controls of gain, high-pass filter, Air, phase invert, phantom power and stereo linking; as well as the crossfader for controlling the balance of mic pre inputs and network receiver channels which to be sent to the headphone or line outputs.

Caractéristiques

Stereo 2x2 audio interface for Dante audio-over-IP networks

Two Red Evolution mic preamps for mic, line or instrument level inputs

Power-over-Ethernet supplied: IEEE 802.3af compliant

Up to 24-bit, 96kHz sampling rates

Robust steel and aluminium chassis

Local input mix to allow 'more-me' style monitoring for easy foldback control

Powerful headphone output even with high-impedance headphones

Local control lockout of mic pre settings, output settings or both

Up to 24dBu line output levels

Independent level control of headphone and line outputs

Mute switch for line output

Mic stand mount

Kensington security slot

Integrated network switch allowing daisy-chaining of network devices

Spécifications

MICROPHONE/ LINE INPUTS

Gain Range: 0dB to 68dB in 1dB steps

Type: Electronically Balanced, Zin = 6.2kO

Max. Input Level: >+24dBu, min gain

Frequency Response: 20Hz - 35kHz ±0.1dB

THD + N: -103dB (0.0007%) @ -1dBFS (@ 24dB Gain)

EIN: <-130dBu 'A'-Weighted (typical)

Signal-To-Noise Ratio: -120dB 'A'-Weighted (typical), min gain

Common-Mode Rejection Ratio: 50/60Hz CMRR: -80dB

Phantom Power: +48V, independently switchable per channel.

HPF: High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel

Air Mode: 2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz). Input impedance drop to 2.2kO

INSTRUMENT INPUTS

Instrument Inputs Gain Range: 0dB to 68dB in 1dB steps

Instrument Inputs Type: Electronically Balanced, Zin = 2MO

Instrument Inputs Max. Input Level: >+15dBu, min gain

Instrument Inputs Frequency Response: 20Hz - 35kHz ±0.1dB

Instrument Inputs THD + N: <-100dB (0.001%) @ -1dBFS (@ 16dB Gain)

Instrument Inputs Signal-To-Noise Ratio: -118dB 'A'-Weighted (typical), min gain

Instrument Inputs HPF: High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel

LINE LEVEL OUTPUTS

Line Level Outputs 0 DBFS Reference Levels: +18 or +24dBu (switchable)

Line Level Outputs Frequency Response: 20Hz - 35kHz ±0.1dB

Line Level Outputs THD + N: <-104dB (0.0006%) @ -1dBFS

Line Level Outputs Dynamic Range: -120dB 'A'-Weighted (typical), 20Hz - 20kHz

HEADPHONE OUTPUT

Headphone Output 0 DBFS Reference Levels: >+19dBm

Headphone Output Frequency Response: 20Hz - 20kHz ±0.2dB

Headphone Output THD + N: <-103dB (0.0007%) @ -1dBFS

Headphone Output Dynamic Range: 117dB 'A'-weighted (typical), 20Hz - 20kHz

Headphone Output Impedance: 5O

Headphone Impedance: 32O - 600O

MICROPHONE/ LINE CROSSTALK

Mic/Line Input To Input: < -72dB; 20Hz - 20kHz (driven channel at -20dBFS)

Mic/Line Input To Output: < -126dB; 20Hz - 20kHz (driven channel at -20dBFS)

Output To Mic/Line Input: < -159dB; 20Hz - 20kHz (driven channel at -20dBFS)

OUTPUT CROSSTALK

Output To Output: < -101dB; 20Hz - 20kHz (driven channel at -20dBFS)

HEADPHONE CROSSTALK

Right To Left: < -85dB; 20Hz - 20kHz (driven channel at -20dBFS)

DIGITAL PERFORMANCE

Supported Sample Rates: 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit

Clock Sources: Internal or from Dante Network Master.

FRONT PANEL CONNECTIVITY

Outputs Headphone Outputs: 1 x 1/4" stereo jack

REAR PANEL CONNECTIVITY

Inputs Mic/Line/Inst Inputs: 2 x Locking Combi XLR

Outputs Line Outputs: 2 x Male XLR

PSU & NETWORK CONNECTIONS

PSU (PoE And DC): 1 x PoE (Port 1) Input and 1 x DC 12V Locking Barrel Input Connector.

Network: 2 x etherCON connectors, also compatible with standard RJ45 connectors.

TOP PANEL INDICATORS

LCD Screen: 1 x Screen (Status & Metering)

DIMENSIONS

Height (Chassis Only): 47.5mm/ 1.87"

Width: 140mm/ 5.51"

Depth (Chassis Only): 104mm/ 4.09"

WEIGHT

Weight: 1.04kg

POWER

Power Over Ethernet (PoE): Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible)

DC Power Supply: 1 x 12V 1.2A DC Power Supply.

Power Consumption: PoE: 11.0W - DC: 13.32W (When using supplied DC PSU)

HEAT PERFORMANCE

Operating Temperature: Operates at up to an ambient temperature of 45 degrees Celcius

Évaluations

Aucune évaluation. Soyez le premier à écrire une évaluation

Voir plus de produits pour la marque Focusrite