6301-series are the standard active monitor speaker in the broadcast and production facilities and have been re-designed with the latest D-class power amplifier and new drivers.
Caractéristiques
20W D-class power amplifier for higher output level and less power consumption with no heat sink
Dedicated 4-inch full range driver for clear audio reproduction
Traditional rugged enclosure of aluminum die-cast with the physically identical height and width to the current B-series
Flat panel design to avoid inadvertent power-off or level change
Auto Stand-by mode (compliant to ErP directive) for energy saving
Detachable IEC type power inlet with multi-voltage power handling
Newly designed mounting bracket (EB-6301) for wall mounting with variable angle adjustments
Spécifications
SPEAKER SECTION
Enclosure type: closed
Unit: 4" full range
Frequency response: 70 Hz - 15k Hz
Sound Pressure Level: 85dB / W (1m)
Maximum SPL: 98dB
AMPLIFIER SECTION Inputs
Connector: 1/4" TS Phone (unbalanced)
Input Impedance: 10k ohm or more
Connector: XLR-3-31 (transformer balanced)
Input Impedance: 10k ohm or more
Output (Thru)
6301ND Connector: XLR-3-32 (IEC 60958 AES/EBU)
Rated utput: 20W
Distortion (T.H.D.): 0.05% (1kHz / 1W output)
Residual Noise: -70dBV or less
Input Sensitivity:
1/4" TS phone: -14dBV (0.2Vr.m.s.)
XLR: +4dBu (1.2Vr.m.s.)
Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level
GENERAL
Dimensions: 120 (W) x 189 (H) x 120 (D) mm
Weight: NX 2.3kgs
Power Requirement: AC 100 - 240V (50/60Hz)
Power Consumption: 10W (less than 0.5W in stand-by mode)