The HDMI1.3-CAT5-ELR Extender extends your Hi-Def display with multi-channel digital audio at resolutions of up to 1080p60 up to 100 meters away from your HDMI or DVI-D source using one CAT-5 cable. It supports DVI-D when used with an HDMI to DVI Adapter, providing greater flexibility and options when integrating several home theater components. This product also extends Ethernet and provides an IR back channel to control AV sources using the same CAT-5 cable extension. With the built-in IR Blaster, simply point the IR remote(s) at the display to control the Hi-Def sources as if they were located in the same room as the display.

Note:
The HDMI1.3-CAT5-ELR Extender is fully HDMI and HDCP compliant when both power supplies are used. Does not support DVI with HDCP.

HDMI 1.3 Features Supported:
Dolby TrueHD & DTS-HD Master Audio
Deep Color Supported (x.v.Color)
225 MHz (up to 12 bit YUV 444 @ 1080p)
CEC Protocol Pass Through
Lip-Sync Pass Through
3DTV Pass Through

Extends HDMI1.3 at 1080p60 up to 100m
Built-in IR Blaster allows IR remote control of source devices from remote viewing location
Supports resolutions up to 1080p and 1920 x 1200
Supports high bit-rate audio formats (Dolby TrueHD / DTS Master Audio)
Fully HDMI and HDCP compliant (when both power supplies are used)
4x DIP switches allow EDID selection

Tech. Spec.:

Input Connector: HDMI 19-pin Female type "A"

Input Connector : 5V DC locking power supply connector

Link Connector: RJ-45 Shielded

Indicator LED: Red power LED (Power is being received when ON)

Supports multi-channel digital audio: Dolby True HD / DTS Master Audio

Dimensions: 8,636 cm D x 8,255 cm W x 3,175 cm H

Fully HDMI and HDCP compliant (when both power supplies are used)

Maximum Resolutions Supported: 1080P / 1920 x 1200@60 Hz

Power Supply: 5V DC @ 2A

Power Consumption: 10W max.

Package includes:

1x HDMI1.3 CAT-5 ELR Sender unit

1x HDMI1.3 CAT-5 ELR Receiver unit

1x HDMI to HDMI 2 meter locking cable

2x 5V DC Locking Power Supplies

1x User's Manual