This is it - the simplest, most affordable digital solution to get everyone the mix they need to perform their best.
This new system platform is completely modular and infinitely expandable, which means it has become the last personal monitoring system you'll ever need.
Introducing the latest addition to the Hear Technologies family - Hear Back PRO.
With this system, there is no learning curve. Whether or not you've ever used a personal monitor mixer, the simple layout of this powerful system makes getting the right mix a quick and effortless experience. Based in Gigabit Ethernet, this framework paves the way for an impressive range of future possibilities.
The Hear Back PRO System: Hub & Mixers
The Hear Back PRO system consists of two main components: the Hub and the Mixer. The modular Hub consists of four card slots, which can be populated with any configuration of input and/or output cards to fit your exact needs. Each Hub has the ability to supply signal and power to as many as 32 Mixers (8 per Network Card), each over a single standard CAT5e/6 cable. And with the built-in HBus In/Out ports, multiple Hubs can be daisy-chained together, allowing for truly unlimited system expansion.
The standard Hub (included in the "4-pack") comes pre-loaded with one Network Card and two 8-channel Analog Input Cards which can accept input signals from an audio mixer via auxiliary, matrix, monitor, and/or direct outputs.
Side-mounted card slot on Mixer for future expansion
Large master knob controls overall main mix, AUX, and intercom levels independently
Volume and panning control of all
Direct and immediate visual feedback of all 16 channels
Up to 8 pairs of stereo-linked channels
Support for sampling rates up to 192 kHz
Selectable XLR or 1/8" Mixer AUX input
Built-in intercom broadcasts the AUX source (mic, MP3 player, click, etc.)
Intercom auto adjusts its own level so even the quietest message never goes unheard
Modular I/O Hub card system lets you customize the system to match your configuration, and can adapt to your needs
Supports secondary power supply to provide redundancy and power to up to
USB port on Hub makes updating firmware for future features and upgrades a simple drag-and-drop operation
Status indicating logos on Hub and Mixers make it easy to detect and diagnose problems, should they arise
Write session info and channel settings on storable Mixer overlays for an unlimited number of presets
Instantly store and recall presets from memory with the push of a button
Most recent configuration is saved, even after power-down