Ik Multimedia iLoud Precision 6 MKII
MPN #iLoud Precison 6 MKII
iLoud Precision 6 MKII is a 6.5-inch studio monitor with +/-1 dB flat response, ARC X room correction, and graphene tweeter for detailed, accurate, and fatigue-free mixing.
iLoud Precision 6 MKII is a 6.5? reference studio monitor engineered for uncompromising accuracy, deep low-end extension, and seamless room adaptation. Its custom Class-D bi-amplification (150 W RMS) powers a graphene-reinforced 1.5? dome tweeter and ultra-light coated-paper 6.5? mid-woofer, achieving an ultra-linear 45 Hz"22.5 kHz (+/-1 dB) response with authoritative bass down to 37 Hz (-4 dB). A 96 kHz DSP engine with linear-phase crossovers ensures phase-coherent transients, pinpoint stereo imaging, and reduced listening fatigue. Built-in ARC X room correction with included MEMS mic automatically tunes the monitors to your space, while onboard LF/HF contouring, desk EQ, and selectable high-pass filters optimize integration into any setup. The damped HDF enclosure and included iLoud Isolation Pods minimize resonances and surface coupling for clean, controlled sound. Capable of 103 dB continuous / 115.2 dB peak SPL @1 m, with mounting options for immersive formats, Precision 6 MKII is designed for professional environments that demand full-range clarity, consistent translation, and long-term mix confidence.
Features
Built in ARC X room correction with included MEMS microphone that auto tunes monitors to your room and supports multiple calibration profiles and speaker emulationsUltra linear response plus or minus 1 dB from 45 Hz to 22.5 kHz with extended low end to 37 Hz at minus 4 dB and down to about 30 Hz with ARCTime coherent linear phase monitoring using 96 kHz DSP and sixth order linear phase crossover at 1.35 kHzGraphene reinforced 1.5 inch tweeter and 6.5 inch ultralight coated paper mid woofer delivering high frequency clarity and fast clean low distortion transients150 W total RMS custom Class D amplification with 120 W LF short term and 30 W HF short term with 0.005 percent amplifier THDHigh output with low fatigue 103 dB continuous and 115.2 dB peak SPL free field at 1 meter with coherent phase 0 to plus 20 degrees from 150 Hz upAdjustable voicing and management with high pass filter options off 35 50 65 80 Hz LF desk mid and HF contour trims and plus or minus 5 dB input gain trimUnit to unit consistency of plus or minus 0.5 dB for precise matching with additional 0 to 10 ms delay for alignment in complex setupsControlled dispersion plus or minus 50 degrees vertical and damped HDF enclosure for reduced resonance and accurate stereo imagingIncludes iLoud Isolation Pods to decouple from surfaces with bottom and rear mounting points for immersive configurations like Dolby AtmosLow latency 2.46 ms time of flight monitoring hand assembled and individually calibrated to tight tolerances in ItalyIn the box Precision 6 MKII monitor power cord ARC microphone with clamp USB B to USB A 2.5 meter cable and 4 Isolation Pods
Specifications
Speaker Configuration
Woofer: 6.5 inch ultralight coated paper mid-wooferTweeter: 1.5 inch graphene-reinforced textile dome tweeterCrossover frequency: 1.35 kHzCrossover type: 6th order linear phase
Amplification and DSP
Amplifier type: Custom-designed Class-DTotal RMS power: 150 watts(LF amplifier: 120 watts (short term), HF amplifier: 30 watts (short term))DSP sampling rate: 96 kHzLatency: 2.46 millisecondsAdjustable additional delay: 0 to 10 millisecondsAmplifier distortion at nominal power: 0.005 percent
Performance and Frequency Response
Frequency response: 45 Hz to 22.5 kHz (plus or minus 1 dB)Low frequency extension: 37 Hz at minus 4 dBPhase response: Coherent, maximum 20 degrees from 150 Hz and upPhase rotation at 100 Hz (HPF off): Maximum 45 degreesDirectivity vertical: plus or minus 50 degrees
Sound Pressure Levels
Max SPL (continuous, free field, 1 meter): 103 dBMax SPL (peak, free field, 1 meter): 115.2 dBMax SPL (peak, half space, 1 meter): 117.2 dB
Tuning and Controls
High-pass filter options: off, 35 Hz, 50 Hz, 65 Hz, 80 HzLF contour: minus 10 dB to plus 6 dBDesk contour: minus 10 dB to 0 dBMid contour: minus 4 dB to plus 4 dBHF contour: minus 6 dB to plus 6 dBInput sensitivity: minus 4 dBu equals 90 dB SPLInput gain trim: plus or minus 5 dB
Calibration and ARC X Integration
Built-in ARC X room correctionCompatible with ARC X macOS and Windows softwareRemote control support for ARC profile selection and calibration management
Dimensions and Weight
Dimensions (height x width x depth): 35.3 x 20.1 x 28.2 centimetersWeight: 7.9 kilograms
Environmental
Operating temperature range: 0 to 35 degrees Celsius (non-condensing)Construction and DesignCabinet material: HDF with reinforced internal bracingEnclosure type: VentedMounting points: Bottom and rear (for immersive audio setups)Isolation pods included for decoupling from surfacesDesigned and hand-assembled in Modena, Italy
Additional Features
Time-coherent and linear-phase responseUltra-flat frequency response for accurate monitoringGraphene tweeter ensures high transient accuracyConsistency between units: plus or minus 0.5 dBSupports smart system updates and firmware enhancementsPerfect for stereo or immersive formats like Dolby Atmos
Included in the Box
1 x iLoud Precision 6 MKII monitor (black)Power cordARC MEMS measurement microphoneARC microphone clampUSB-B to USB-A cable (2.5 meters)Kit of 4 iLoud Isolation Pods
No reviews.
View more products from
Ik Multimedia
