Shopping cart | Login |
English | Français
The entire Studio Economik's website is now priced in Canadian Dollars only.
HomepageKeyboardsSynths › Moog Mother-32
Moog Mother-32

Mother-32 is a tabletop semi-modular synthesizer. It's an analog instrument adding raw analog sound, sequencing & extensive interconnectivity to any electronic or modular ecosystem

This expansive new live performance and production instrument is handcrafted in Asheville, NC and has been meticulously designed to provide musicians with a diverse array of creative tools to inspire new music, unique sound and endless sonic exploration.

Mother-32 comes secured in a rugged extruded aluminum enclosure with wood sides and features a voltage controlled 32-step sequencer with 64 sequence locations, definitive Moog low pass and high pass Ladder Filter, 2 voltage controlled mixers, a classic Moog oscillator with dual outputs, wide-range LFO with audio-rate modulation capability, MIDI input and MIDI to CV conversion, white noise, a modular patchbay with 32 patch-points for extended synthesis complexity and an assignable CV jack with 16 assignable sources.
  • Semi-Modular design requires no patching for swift, inspired music creation
  • Voltage Controlled 32 Step Sequencer with 64 Sequence Locations
  • Low Pass & High Pass Moog Ladder Filter (20Hz-20kHz) with voltage controlled resonance
  • External audio input for processing outside sound sources
  • Definitive Moog oscillator with Pulse and Sawtooth wave outputs
  • 5-pin MIDI input and MIDI to CV converter
  • 32 Modular Patch Points (Includes 5 patch cables)
  • 2 Voltage controlled mixers
  • Superb companion to Werkstatt 01, Minitaur and other synthesizers
  • Main module can be easily transferred into a Eurorack skiff or case
  • Mount 2 or 3 units vertically with optional 2 and 3 Tier kits
  • Complete solution for new Eurorack users - no other items required

  • Single VCO with simultaneous Sawtooth and Pulse wave Outputs (+/-5V)
  • 1 V/Octave from 8Hz to 8KHz (16KHz max with LFO/CV)
  • Panel Frequency control (+/-1 Octave)
  • Toggle Selector for waveform routed to the mixer
  • Pulse Width control
  • Linear FM and 1V/Octave Exponential FM inputs (+/-5V)

  • Output normalled to Ext Audio input
  • White Noise output (+/-5V)

  • Crossfades between selected VCO waveform and Ext Audio input (normalled to White Noise)
  • Mix CV input (+/-5V)

  • 20Hz to 20KHz switchable Low Pass/High Pass 4-pole Transistor Ladder Filter with voltage controlled Resonance
  • VCF Cutoff input (+/-5V)
  • VCF Resonance input (+/-5V)
  • VCF Output (+/-5V)

  • Selectable CV Source: EG or ON (drone)
  • VCA CV input (0 to +8V in EG mode and +/-5V in ON mode, summed with signals from ON/EG switch)
  • Output Volume Control (VCA Out and Line/Headphone Out)
  • VCA output (+/-5V) and rear panel 1/4" Headphone/Audio Output (+/-1.7V peak)

  • Square wave output (+/-5V)
  • Triangle wave output (+/-5V)
  • Selectable waveshape to VCO and VCF MOD sections
  • Panel Rate control .1Hz to 350Hz (600Hz max)
  • LFO Rate CV input (+/-5V)

  • Variable controls for Attack and Decay
  • Sustain ON/OFF for single-trigger (ASD) or multi-trigger (AD) behavior
  • External Gate input (0 to +5V; Tolerant of 10V gates)
  • EG output (0 to +7.5V)

  • Selectable Source: EG/VCO MOD or LFO (EG normalled to VCO MOD in)
  • VCO Mod input (normalled to EG/VCO MOD switch position)
  • Variable Modulation Amount control
  • Selectable Modulation Destination: VCO Pitch or PWM (PWM summed with Pulse Width panel control)

  • Selectable Source: EG or LFO
  • Variable Modulation Amount control
  • Selectable VCF Modulation Polarity (+/-)

  • Voltage controlled crossfade/mix circuit for mixing two DC coupled signals
  • Mix 1 Input (Normalled to ground)
  • Mix 2 Input (Normalled to +5V)
  • Mix Control CV input (-5V to +5V)
  • Mix Output: Un-inverted output (-5 to +5V)

  • 1x input 2x output signal multiplier
  • Mult Input: Buffered signal
  • Mult Outputs: 1 and 2

  • Single octave 13-note keyboard (In Step Edit Mode this is used to select, mute and enable sequencer steps.)
  • Octave Up/Down buttons select from 8 available octave settings
  • Glide Time control
  • KB CV output (-5 to +5V)
  • Gate Output (0 to +5V)

  • Dual-mode 32 step sequencer with 64 sequence locations

  • Performance Modes:
  • In KB Mode, the Keyboard is used to play the instrument, enter sequence data and transpose sequences
  • In Step Mode, the keyboard functions as the step sequencer interface and is used to enable and mute steps, update note data and select sequence banks.
  • Each sequence step includes: Note Value, Gate Length (Tie), Rest On/Off, Accent On/Off, Glide On/Off and Ratchet count (up to 4 note-repeoccurring in the duration of a single note)
  • Sequencer Panel Controls: Tempo, Swing, Run/Stop, Hold, and Reset
  • Sequencer Control Inputs: Tempo, Run/Stop (also used for sync), Reset and Hold
  • Sequencer Control Outputs: KB, Gate, Accent Pulse

  • The patchbay contains 32 patch points (3.5mm)
  • Available Inputs: External Audio, Mix CV, VCA CV, VCF Cutoff, VCF Resonance, VCO 1V/Octave, VCO Linear FM, VCO Modulation, LFO Rate, Mix 1, MixVC Mix Control, Mult, Gate, Tempo, Run/Stop, Reset and Hold
  • Available Outputs: VCA, Noise, VCF, VCO Saw, VCO Pulse, LFO Triangle, LFO Square, VC Mix, Mult 1, Mult 2, Assign, EG, KB, Gate

  • Multipurpose control output for selecting from 16 available functions: Sequencer Accent, Sequencer Clock, Sequencer Clock /2 Sequencer Clock/4, Decimated "Ramp", Decimated "Saw", Decimated "Triangle", Stepped Random, STEP 1, MIDI Note On Velocity, MIDI ChannelAftertouch, MIDI Pitch Bend, MIDI CC1 Mod Wheel, MIDI CC2, MIDI CC4 and MIDI CC7
  • Specifications
  • Dimensions: 12.57"W x 4.21"H (with knobs) x 5.24"D
  • Weight: 3.5 lbs.
  • Power Consumption: 2.8W
  • Included Power Supply: 100-250VAC, 50-60Hz, +12VDC 1A
  • Patchbay: 32x 3.5mm jacks
  • Rear Panel Audio Out: ΒΌ" Headphone / Audio

  • Current Draw: 230mA (+12V - from 10-pin header)
  • Mounting Dims: 60HP (.69" 26mm Module Depth)
  • Reviews
    Price *
    Free shipping in Canada. Conditions
    Additional information
    For more information about the Mother-32, please visit the website of Moog
    Moog Logo
    ©2004-2016 - Systemes Guinois® Inc. All Right Reserved.