Pelonis Signature Series
The Pelonis Signature Series is a line of critical listening high fidelity monitors. The latest addition to the line is the already critically acclaimed Model 42. Holding true to the purist approach, the active, bi-amlified system is controled and powered externally by 4-100 watt amplifiers and state of the art 96K DSP. Additionally, the end userhas acces to 5 bands of parametric EQ including the option for shelving on the 1st and 5th band. All is housed neatly in a1 RU chassis. In the Model 42 range, you can grow your system from stereo to a variety of multi-channel configuration. The subwoofer is powered by controller by the Model 42LF 1RU. In 3.1, 5.1 and 7.1 systems, the Model 42CS(Center/Sub) takes care of the Center and .1 channels.
Stepping up the ladder to the PSS110P. This system is based on a custom 10" Tannoy driver and is boasts one of the most elaborate passive crossovers ever. As with all Chris pelonis Signature Speakers, the system is complete with carefully matched amplification. Amplifiers range from 2 to 6 channel by 400 watts (800 into 4 ohms for subwoofer) allowing for true audio file experience on any level. The PSS12LF is a high excursion "sub woofer" based around a 2" throw 12 " driver in a sealed cabinet. It is perfectly matched to the PSS110P system. The PSS110P system is at homeeither free standing of soffit mounted and gives a true main monitor experience in a small, affordable package.
The Big Boys in the Pelonis range consistes of the PSS115, PSS215A and the PSS215AW. These are large monitors you can trust. Not only do they provide incredible dynamic range but also the accuracy and detail is unsurpassed. No hype here, just the whole, true picture. These sytems are personlly voiced by Chris pelonis onsite to assure an optimumized, personal match for each environment and listner.
System Type: 4" two-way Dual Concentric speakerFrequency Response: 75Hz-35kHz (±3dB)Frequency Range: 63Hz-37kHz (-10dB)System Sensitivity: 90dB (395mV input, 2.83V output @ 1m, 1kHz LF output, -10dBV input sensitivity)Rated Maximum SPL: 106dB (Peak SPL for 1 pair driven, 2.0V input @ 1m, -10dBV input sensitivity)Dispersion: 60° (-6dB across frequency range)THD: 0.6% (2.83V @ 1m, 1kHz LF output, 100Hz-10kHz)LF Driver : 4" (100mm) multi fiber paper pulp cone)LF Nominal Impedance: 6 OhmsHF Driver: 0.75" (19mm) titanium dome with neodymium magnet systemHF Nominal Impedance: 4 OhmsMagnetic Shielding: No
