DI with our 10meg ohm inputs found in our Nice DI.
Tilt TC/500 uses a powerful tone control EQ , a unique 3 position Tilt EQ with 3 carefully selected tilit positions to cover lows, mid and high frequencies. A dark/bright control to tilt the EQ to darken your mix (add LF) or brighten the mix (add HF).

There is a also a 10 position LED metering that accurately represents the output level.

Class A Discrete input line buffer amp

Class A Discrete 10meg ohm DI input

Class A Discrete output amp

Phoenix custom output transformer

Unique 3 position Tilt EQ

Controllable LF, MF & HF Tilt positions

Dark & bright tone control

Class A Stereo DI Output specs.

Frequency Response: 20Hz to 20Khz +/- 0.5dB

Maximum Output: +26dBu @ 1Khz

Noise: 90dB @ 22Hz to 22KHz

Class A, discrete, truly balanced transformerless input stage.

The Class A DI has a very high input impedance (10Mohm), without the use of FET's. This means that the guitar pickups are not loaded as with a lower impedance input, and so allows every transient to be reproduced, making even a cheap guitar sound exceptional.

Inputs: 1/4" jack (TS) input & through input on the front panel

Transformer isolated balanced output (XLR) on the rear panel

Tilt EQ with 3 fixed Tilt positions : 160hz, 800hz & 1.6khz

Dark/bright tone control

10 position LED output metering.

Output level control.