The Primacoustic Recoil Stabilizer is a unique speaker mounting device that eliminates disruptive resonant coupling from the loudspeaker to the stand. 15"X11" Horizontal
Designed for nearfield monitors, it provides a stable base that reduces the recoil caused by the forward energy of the loudspeaker motion.
The Recoil Stabilizer is a loudspeaker platform that combines three basic components: a high-density urethane foam base to isolate the speaker from the shelf, monitor-bridge or stand; a heavy ¼" laser-cut steel plate; and a thin neoprene top surface. The foam effectively decouples the loudspeaker to eliminate vibration-borne resonance that invariably introduces phase anomalies, while the steel plate introduces significant mass to the structure, stabilizing the speaker. The no-slip surface coats the top to ensure the monitor stays firmly in place.
By reducing the backward 'recoil' as the speaker coil pushes energy forward, the initial transient no longer suffers lag and the sharpness of the resulting impulse is more defined. Upon first listening, one immediately notices more punch and extended low end. Upon further listening, one begins to notice greater detail at all frequencies, improved transient response and more defined depth of field. This not only makes mixing easier, but since the Recoils eliminate unknown resonance from contaminating the sound, your mixes immediately translate better to other rooms and audio systems.
I put these under my Adam A3A's in an acoustically treated room and for the first time I heard how good my speakers were. It was like I was hearing them for the first time, properly. The sound was so focused. I hear bass I have never heard before. The mids were something else and the highs went for ever. I can not stress how big of a difference these made.