| You are here : Homepage > Products |
|
|
| For sale |
| List Price : |
1595.57 US |
| Our Price : |
1295.89 US |
| Free shipping in Canada * |
|  |
 |
| QSC PLX3102 |
|
QSC PLX3102
The PLX3102 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3102 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.
About PLX2 Series Power Amps
The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight® technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems.
Specifications
SPECIFICATIONS
PLX3102
STEREO MODE, both channels driven *
8 ohms
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD
550 W
600 W
4 ohms
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD
900 W
1000 W
2 ohms EIA 1 kHz 1% THD
1550 W
BRIDGE MONO MODE *
8 ohms
20 Hz-20 kHz 0.1% THD
EIA 1 kHz 0.1% THD
1900 W
2100 W
4 ohms 1 kHz 1% THD
3100 W
Signal to Noise (20 Hz - 20 kHz)
-107 dB
Input Sensitivity @ 8 ohms
1.23 Vrms
Gain @ 8 ohms
35 dB
Output Circuitry
2-Tier Class H
Distortion (SMPTE-IM)
Less than 0.02%
Typical Distortion
1/8 rated power, 20 Hz-20 kHz
Full rated power, 20 Hz-20 kHz
Less than 0.02%
Less than 0.02%
Frequency Response
20 Hz-20 kHz, -0.5 dB
Damping Factor
Greater than 500
Input Impedance
20k ohms balanced
10k ohms unbalanced
Input Clipping
11 Vrms (+21 dBu)
Cooling
Variable-speed fan, rear-to-front air flow
Input Connectors, each channel
3-pin XLR and 1/4" TRS balanced
Output Connectors, each channel
Neutrik® NL4 Speakon® and Touch-proof binding posts
(Both channels available on Ch 1 NL4 connector)
Rear Panel Switches
Input Configuration: Bridge/Stereo/Parallel
Clip Limiters each channel
Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic)
Front Panel Controls
Detented Gain Attenuator: 0 to ? dB
Power On/Off
Front Panel Indicators
Clip: Red LED
-10: Green LED
Signal (-35 dB): Green LED
Power: Blue LED
Parallel: Amber LED
Bridge Mono: Amber LED
PROTECTION
Amplifier Protection
Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
Stable into reactive or mismatched loads
Load Protection
On/off muting, DC-fault power supply shutdown
Infrasonic
-3 dB, 5 Hz
DC fault
Power supply shutdown
Ultrasonic
-3 dB, 85 kHz
Short Circuit
Cutback
Thermal
Muting at 90° C
Over Current
Active clip limiting
Power spply cutback
High Line
Standard +15%, survive +25%
Low Line
-33%
PHYSICAL
Dimensions
Height
Width
Depth, Rack mounting surface to rear panel
Overall Depth
3.5" (8.9 cm) 2 rack spaces
19" (48.3 cm)
12.8" (32.6 cm)
14.875" (37.9 cm)
Weight
21 lbs. (9.5 kg) net
26 lbs. (11.8 kg) shipping
Agency Approvals
CE, FCC, cUL, UL
|
|
|
Studio Economik UA Apollo NEWS! We are placing the 1rst order for UA Apollo right now, available end February. Limited quantity available on first shipment. Pre-orders available. Please contact us to get yours!
|
