The Rane Sixty-Four mixer is the tool you need to step your game up. More channels, more decks, more effects Challenge accepted.
Rane is pleased to introduce the Rane Sixty- Four Mixer for Serato DJ, routing your pro- ductions to a higher level. It is compact and portable with the ergonomics and features required for many mixing styles and musi- cal genres. It equally accommodates mixing analog, digital vinyl system (DVS), digital or a combination of these. While designed for and bundled with Serato DJ software, high-per- formance Rane ASIO and Core Audio drivers also allow operation with many 3rd-part DJ software applications.
The Sixty-Four's integration with Serato
DJ software provides intuitive control of software features like Libraries, Sync, Slip, Jump-to-loop and samples, without taking your eyes off the mixer or packing more gear. Four layers of MIDI mappable controls pro- vide the flexibility required for any combina- tion of Serato DJ and 3rd-party applications.
The Rane Sixty-Four FlexFx Loop provides ultimate control of your audio effects. Quickly and easily add and remove audio channels from the loop, apply any of the six built-in beat synchronized effects, use Serato DJ iZotope effects post-fader and add an exter- nal effects processor, in any combination!
Seamlessly switch from one DJ to the next using any combination of Serato DJ and 3rd- party software. With a computer plugged into each of the two USB ports, simply switch
a mixer source selector to the desired USB source, and audio and MIDI are instantly assigned. 22 channels per USB port provide the resources you need for music produc- tion, remixing, and routing iZotope effects to your post-fader mix.
Includes Serato DJ software.
Includes Rane ASIO and Core Audio Drivers for Serato DJ and other audio programs.
Advanced MIDI and audio routing: route any deck to either USB Port, and MIDI follows the audio.
Control Library, Cues, Loops and Samples on two computers.
30 controls with 157 unique mappings for software.
Each of the two USB ports supports six stereo record and five stereo playback channels.
USB record channels support:
Vinyl control signal for four Virtual Decks, or record any one of the four Decks post-fader.
Record the Main Mix, Mic 1 or Mic 2.
FlexFX USB Insert Send to each computer.
USB playback channels support:
Playback for four Virtual Decks.
FlexFX USB Insert Return from each computer.
Great-sounding 32-bit floating-point audio sampled at 48 kHz.
4 Stereo unbalanced RCA jacks
Phono or Line Level Inputs have rear panel switches for each input.
Phono Response is RIAA ±1 dB, Gain: 31 dB at 1 kHz.
Max Phono Input = 126 mV.
Max Line Input = 4 Vrms.
Additional Aux Line Input is a fifth input selectable in any channel.
Additional Session Input from RCA analog or S/PDIF with a dedicated level control
16-bit or 24-bit PCM only.
16 kHz to 144 kHz sample rate.
24 bit 48kHz sample rate.
24-bit, 48 kHz; Dynamic range 103 dB A-weighted.
24-bit, 48 kHz; Dynamic range 107 dB A-weighted.
Digital Signal Processing
48 kHz, 32-bit floating point.
Six Stereo Record, Five Stereo Playback.
48 kHz, 32-bit floating point.
Two Mic Inputs
Balanced 1/4 TRS & XLR combination jacks
Single knob high/low Tone controls
Mic 1 +48V Phantom Power on/off switch
Mic 2 Mic/Line-level switch
Main Out is on a pair of balanced XLR jacks with pin 2 "hot" per AES standards.
Booth Out is on a pair of balanced 1/4 TRS (tip-ring-sleeve) jacks.
Session Out is available on a pair of unbalanced RCA jacks.
Headphones outputs are available on both 1/4 TRS and 3.5 mm jacks.
Frequency Response = 20 Hz to 20 kHz ±0.25 dB, Line in to Line out
THD+N = <0.01% re 0 dBFS, 20 to 20 kHz, 20 kHz BW
Unbalanced jacks maximum = 4 Vrms (RCA & FlexFX)
Stereo balanced jacks maximum = 8 Vrms (Main & Booth)
Internal Universal Power Supply
100 to 240 VAC, 50 Hz to 60 Hz, 15 W max
14.3" x 12" x 4" (36.4 cm x 30.5 cm x 10.2 cm)
Weight = 11.3 lb (5.2 kg)