RME M-1620 Pro
MPN #M1620 PRO
RME M-1620 Pro 16-A/D, 20-D/A converter with ADAT, MADI, Milan AVB, dual headphone outs, SteadyClock FS, redundant I/O/PSU, web control, 24-bit up to 192 kHz
The RME M-1620 Pro is a powerhouse 16-channel A/D and 20-channel D/A converter that bridges analog audio with MADI, ADAT, and Milan AVB networks in a single 1U rack unit. Designed for both studio and live environments, it delivers pristine conversion quality with switchable input and output levels up to +24 dBu, ensuring compatibility with a wide range of professional gear. Its newly developed front panel blends precision LED metering, a clear display, and dual independent headphone outputs, making it easy to monitor and manage signals directly on the unit.
This Milan-certified interface supports up to 128 channels at 48 kHz with fixed, deterministic latency, and is built for mission-critical reliability thanks to dual network ports, dual MADI connections, an internal AC supply with monitored DC input, and optional redundant PSU. Internal routing is highly flexible, allowing any analog, digital, or network stream to be sent to any output-including direct headphone monitoring. Control is available via the front panel or remotely through an intuitive web interface, making setup, signal troubleshooting, and live adjustments fast and efficient. Combined with RME's SteadyClock FS jitter suppression and optional optical MADI SFP module, the M-1620 Pro is a future-proof solution for expanding or integrating high-channel-count audio systems with uncompromising fidelity and stability.
Caractéristiques
Converts 16 analog line-level signals to and from MADI, ADAT, and Milan AVB network audio.Switchable input and output levels per channel, up to +24 dBu.Dual network ports and dual MADI connections for full redundancy in critical live environments.Optional optical MADI SFP module for flexible connectivity.SteadyClock FS for ultra-low jitter and precise clocking.Standalone operation with direct front-panel control and user preset recall.Web-based remote control over any network, including Wi-Fi.Two independent headphone outputs with flexible routing for fast monitoring.Integrated routing matrix for direct signal patching and troubleshooting.Milan-certified with deterministic, fixed-latency audio networking (up to 128 channels @ 48 kHz).
Spécifications
General Specifications:
Model: M-1620 ProType: 16 channel analog to digital, 20 channel digital to analog converterForm Factor: 1U 19 inch rackmountNetwork Protocol: Milan AVB IEEE 1722.1 compliantRedundancy: Dual network, dual MADI, redundant PSU optional
Connectivity:
16 line inputs switchable per channel +24 dBu, +19 dBu, +13 dBu16 line outputs switchable per channel +24 dBu, +19 dBu, +13 dBu2 phones outputs 6.3 mm TRS stereo or mono4 ADAT IO1 MADI optical SFP optional multimode or single mode1 MADI coaxial IO BNC1 Word Clock IO BNC2 Gigabit Ethernet portsUSB port for firmware and remote control
Line Input Specifications:
Resolution 24 bitAC coupled, servo balancedInput impedance 9.5 kOhmSNR at +24 dBu 117.0 dB RMS unweighted, 120.7 dBASNR at +19 dBu 116.3 dB RMS unweighted, 119.9 dBASNR at +13 dBu 114.7 dB RMS unweighted, 118.3 dBAFrequency response 5 Hz to 20.5 kHz at 44.1 kHz sample rateTHD at -1 dBFS less than -111 dB, less than 0.00029 percentTHD+N at -1 dBFS less than -108 dB, less than 0.00039 percentChannel separation greater than 110 dB
Line Output Specifications:
Resolution 24 bitDC coupled, truly balancedOutput impedance 200 Ohm balanced, 100 Ohm unbalancedSNR at +13 dBu 119.2 dB RMS unweightedSNR at +19 dBu 119.7 dB RMS unweightedSNR at +24 dBu 119.9 dB RMS unweightedFrequency response at 44.1 kHz 0 Hz to 20.3 kHz sharp filterFrequency response at 96 kHz 0 Hz to 30 kHz slow filter, 0 Hz to 44.1 kHz sharp filterFrequency response at 192 kHz 0 Hz to 60.5 kHz slow filter, 0 Hz to 85 kHz sharp filterTHD at +19 dBu less than -120 dB, less than 0.0001 percentTHD+N at +19 dBu less than -113 dB, less than 0.0002 percentChannel separation greater than 110 dB
Phones Output Specifications:
Resolution 24 bitOutput level +4 dBu or +19 dBu, balanced mode +10 dBu or +25 dBuSNR at +19 dBu greater than 109 dB RMS unweighted, greater than 111 dBAFrequency response at 44.1 kHz 0 Hz to 20.0 kHz sharp filterFrequency response at 96 kHz 0 Hz to 20.0 kHz slow filter, 0 Hz to 44.3 kHz sharp filterFrequency response at 192 kHz 0 Hz to 43 kHz slow filter, 0 Hz to 85 kHz sharp filterTHD+N at +4 dBu 32 Ohm load less than -100 dB, less than 0.001 percentTHD+N at +19 dBu 100 Ohm load less than -100 dB, less than 0.001 percent
Features:
SteadyClock FS for jitter reductionAdjustable aliasing filtersIntegrated routing matrixFull stand-alone operation with front panel controlWeb interface remote control via any network link including Wi-FiSupports up to 128 channels at 48 kHz, 96 channels at 96 kHz, 64 channels at 192 kHz over Milan AVBMonitored DC input for redundancyLED level meters and display on front panel
Écrire une évaluation à propos du RME M-1620 Pro
Voir plus de produits pour la marque
RME
