MPN #SE-V7    
SE VPACK/CLUB

$1299.00

Financing available
Free shipping in Canada. Conditions

Comes complete with a V7 X, V KICK, two V BEATS & V CLAMPS, a pair of sE7 microphones and the same robust flight case that comes with the V PACK ARENA



The V PACK CLUB consists of one V KICK for your bass drum, 2 V BEATs and V CLAMPS for your toms, one V7 X for your snare, and a pair of sE7 condensers for your overheads. All mics and accessories come securely packaged inside a robust and distinctive plastic flight case, with an empty space included to accommodate your favorite hi-hat mic.

The V KICK is the most compact and versatile drum microphone in its class, intended for use with kick (bass) drums and other sources such as miking bass guitar speaker cabinets, floor toms or other large drums where low-frequency energy is of the utmost importance. Its integrated swivel joint allows for any required mic placement, and its specialized capsule provides a sound character tailored specifically for kick drums, which can be further shaped with the use of two switches on the rear side of the microphone. From warm and classic to modern and aggressive, the V KICK gives you any kick drum sound you need.

The V BEAT is the most compact drum microphone in its class, intended for use with snare or tom drums. Unlike the V7, which is optimized for vocals, the V BEAT features the same high-grade sonic performance as the V7 X instrument dynamic, but in a dedicated low-profile & drum-friendly form factor. Tuned for instrumental use, it can also be used on sources such as electric guitar speaker cabinets or brass instruments.

The V7 X (sibling to the acclaimed vocal-oriented V7) is a dynamic instrument microphone ideal for a broad range of instrumental applications - both in the studio and on stage. Its specialized capsule?s innovative aluminum voice coil and brand new acoustic design are specifically tailored for full-bandwidth instrumental reinforcement & recording, with a perfect balance of detailed highs and deep, ultra-powerful lows, allowing for use on nearly any source from electric guitar cabinets to brass instruments, snare drums to choir, and many more.

The sE7 is a high-quality back-electret small diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond.
V KICK
  • Highly compact
  • 4 switchable sonic voicings, from classic to modern
  • Left-hand switch shapes mic's overall voicing
  • Right-hand switch specifically tailors the high-frequency character
  • Uses DMC7 SB capsule
  • Advanced internal capsule suspension
  • All-metal housing and spring steel grille with gold XLR connector
  • Internal windscreen

  • V BEAT
  • Superior isolation and effortless sonics with minimal footprint and maximum flexibility
  • Ideal for snare or tom drum whether on-stage or off
  • Compact, flexible, and minimalist design
  • DMC7 X capsule
  • Unique, patented integrated capsule suspension
  • All-metal housing and spring steel grille with gold XLR connector
  • Internal windscreen

  • V7 X
  • Supercardioid dynamic mic
  • Uses the DMC7 X capsule
  • All-metal housing and beveled spring steel grille
  • Integrated capsule suspension
  • Internal windscreen
  • Gold-plated XLR connector

  • sE 7
  • A compact and classy condenser mic
  • Ultra-thin diaphragm for excellent transient response
  • Cardioid polar pattern
  • Quietest pencil mic in its class
  • Switchable pre-attenuation pad
  • Switchable low-cut filter
  • All-metal housing with gold-plated XLR connector
  • V KICK
  • Casule: dynamic
  • Voice coil: aluminum
  • Magnet: neodymium
  • Directional pattern: supercardioid
  • Frequency range: 20Hz - 19kHz
  • Impedance: 300 Ohms
  • Sensitivity: 0.2 / 0.4 mV/Pa (-69 / -75 dBV)
  • Connectivity: 3-pin male XLR
  • Dimensions (HxL): 2.4" x 5.3"
  • Weight: 16.5 oz (468 g)

  • V BEAT
  • Casule: dynamic
  • Voice coil: aluminum
  • Magnet: neodymium
  • Directional pattern: supercardioid
  • Frequency range: 30Hz - 19kHz
  • Impedance: 300 Ohms
  • Sensitivity: 2.0mV/Pa (-54dBV)
  • Connectivity: 3-pin male XLR
  • Dimensions (HxL): 2.4" x 4.3"
  • Weight: 12.2 oz (347 g)

  • V7 X
  • Casule: dynamic
  • Voice coil: aluminum
  • Magnet: neodymium
  • Directional pattern: supercardioid
  • Frequency range: 30Hz - 19kHz
  • Impedance: 300 Ohms
  • Sensitivity: 2.0mV/Pa (-54dBV)
  • Connectivity: 3-pin male XLR
  • Dimensions: 1.86" diameter x 6.93" length
  • Weight: 9.49 oz (269 g)

  • sE7
  • Capsule type: 1/2" back-electret condenser
  • Polar pattern: cardioid
  • Frequency range: 20Hz - 20kHz
  • Sensitivity: 19 mV/Pa (-34.5 dBV)
  • Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)
  • Equivalent noise level: 16 dB(A)
  • Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)
  • Signal to noise ratio: 78 dB
  • Low-cut filter: 80 Hz, 6 dB/Oct, switchable
  • Attenuation pad: 20 dB, switchable
  • Powering: 48 Volts according to IEC 61938
  • Electrical impedance: <200 Ohms
  • Recommended load impedance: >1k Ohms
  • Current consumption: 3.0 mA
  • Connectivity: 3-pin male XLR connector
  • Dimensions: 0.91" diameter x 4.72" length
  • Weight: 4.52 oz (128 g)
  • View more products from SE
    SE Logo
    Now accepting
    Financing available
    Like us
    Follow us
    ©2004-2024 - Studio Economik Inc.® All Right Reserved.