Exceptionally quiet design, suitable for use with DAT and other digital formatsExtended frequency response of 20 Hz-20 kHzDynamic range greater than 100 dBTransformer balanced inputs and outputs for superior rejection of RFI and electromagnetic humThree selectable mic/line inputsTwo selectable mic/line outputsWide range input gain controls handle hot signal levels without attenuators48 V phantom, 12 V phantom, and 12 V T (A-B) microphone powerPop-up pan potsLink switch gangs inputs 2 and 3 to control a stereo microphoneSwitchable low-cut filters on each inputBi-color LED signal presence and peak indicator for each inputProfessional VU meters with selectable timed or toggled backlightingDual clutched Master gain control for simultaneous or separate adjustment of output levelsBi-color LED limiter and peak indicator for each outputTwo linkable output peak limiters with adjustable thresholds and release timesSlate microphone and slate tone with selectable functionsIsolated two-way talk-back using Monitor In and modified Slate Mic/Tape Out jackHigh tolerance 3.5 mm jacks for stereo Tape Out and Monitor In1 kHz tone oscillatorMix bus jack and cable to link FP33 or FP32A mixersHeadphone monitor mode switch to select L, L+R (Mono), R, or StereoInternal headphone level adjustments to balance post-master audio levels and Monitor In levels at the headphone outputSelectable M/S decoding circuit for headphone monitor.Mixer/Monitor In switch (locking and momentary)Internal Monitor defeat switch for split-feed headphone operationHeadphone volume control1/4 in. and 3.5 mm jacks for stereo headphone outputs.Customized operation via internal DIP switches, trim pots, slide switches, and optional jumpersRegulated voltage rails (±15 Vdc) provide exceptional headroomBi-color power On/Off LEDBattery check switch and low battery warning LEDNon-polarized external power jackExternal power operating range of 12 to 30 VdcSoft-touch, color coded control knobs with raised position indicatorsMetal XLR input and output connectorsRugged, plated metal chassisOperates for 8 hours on two 9 V alkaline batteriesIncludes carrying case, shoulder strap, and mix bus cableAbility to link with the Shure FP24 mixer using the A33LK accessory cable to create a highly portable 5 x 2 audio production system.
Measurement conditions, unless otherwise specified: Operating Voltage: 18 Vdc Full gain 1 kHz input signal. Output terminations: Line 600 ohms;Mic 150 ohms; Tape Out 50 kilohms, Headphone 200 ohms
Frequency Response 20 to 20,000 Hz +/- 2.0 dB (channel controls centered).