The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices
The ML-16D has 2 D-Sub inputs and 2 D-Sub outputs, which can easily be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.
Caractéristiques
Dante focused interface for connection of external audio into or out of a Dante audio network
16 channel analog line input and 16 analog line outputs (48k/96kHz) using four D-Sub connectors
Dual redundant Ethernet jacks which support both primary and secondary connections
Dante primary and secondary connectors support redundancy
AES67 and Ravenna compatible
Dante Controller for flexible routing
Up to 96kHz/24-bit quality
Equipped with a signal/overload indicator that enables level monitoring of analog input/output signals
Reference level dip switches for selectable DBu level metering
LED display for signal level and overload per input/output channel
Firmware updatable via Dante port
Equipped with D-sub 25-pin connectors as line input/output connectors
1U rack mount size
Optional BO-32DE (D-sub/Euro Block breakout box) supports Euro Block connectors
Optional BO-16DX/IN and BO-16DX/OUT (D-sub/XLR breakout box) support XLR connectors
Analog Inputs/Outputs LINE INPUTS
Connector: D-sub 25pin female x 2
Locking screws: No.4-40 UNC (inch type)
Nominal input levels: +4dBu,
+6dBu (only when maximum input level is +15dBu)
Maximum input levels: +24dBu, +22dBu, +20dBu, +18dBu, +15dBu
(set by REF. LEVEL switches)
Input impedance: 10k or higher
LINE OUTPUTS
Connector: D-sub 25pin female x 2
Connector: No.4-40 UNC (inch type)
Output impedance: 200 or lower
Applicable load impedance: 2k or higher
Nominal output levels: +4dBu,
+6dBu (only when maximum output level is +15dBu)
Maximum output levels: +24dBu, +22dBu, +20dBu, +18dBu, +15dBu
(set by REF. LEVEL switches)
PRIMARY/SECONDARY
Connector: RJ-45 x 2
Transmission protocol: Dante
Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
Cables: Category 5e or faster STP cables
Power: AC 100 - 240V, 50/60Hz
Power consumption: 14W
Dimensions (WxHxD): 19.0" x 1.77" x 11.96" / 483 x 45 x 303.8 mm
Weight: 7.3 lbs. / 3.3 kg
Operating temperature range: 32F to 104F / 0C to 40C
Standard accessories: Power cord, Rackmount screw kit, Owner's Manual (including warranty)