Tascam MM-4DIN-E
UPC/EAN #043774033874
MPN #MM-4DIN-E
$1519.00
Économisez 20.1%, Prix suggéré $1900.00
4 Euroblock mic line inputs with phantom power, 4 Dante I O, DSP with 8x4 matrix mixer, PoE support, remote control, half rack size, scene presets
The TASCAM MM-4D/IN-E is a compact and versatile 4-channel mic/line input Dante converter, tailored for professional AV installations and networked audio environments. Featuring Euroblock connections and phantom power support, this half-rack unit delivers clean, studio-grade audio with full 24-bit/96kHz resolution and robust DSP processing onboard.
Equipped with an 8-in/4-out matrix mixer, the MM-4D/IN-E allows seamless integration of analog and Dante inputs, with advanced DSP tools such as EQ, compression, auto-leveling, ducking, and ambient noise compensation. PoE-powered and remotely configurable via TASCAM DCP CONNECT or EZ CONNECT software, it's a perfect solution for scalable Dante systems needing flexible routing, superior audio quality, and reliable performance-all in a compact and efficient form factor.
Caractéristiques
4 Mic/Line Inputs with Phantom Power (Euroblock): Accepts microphones or line-level signals and supplies +48V phantom power when needed.Remote Gain Control: Adjust mic input levels remotely via software or Dante-compatible controllers.4 Dante Inputs and 4 Dante Outputs: Fully integrates into Dante networks for flexible I/O routing.Built-In DSP with 8x4 Matrix Mixer: Mix multiple Dante and analog inputs to any output zone with onboard processing tools.Comprehensive Audio Processing: Includes EQ, compressor, auto-leveler, ducking, noise compensation, and limiter effects.Studio-Quality Mic Preamps: Delivers low-noise, clean gain with outstanding clarity and dynamic range.Powered via PoE: Operates with a single Ethernet cable for both data and power-no external adapter required.Remote Configuration with Control Software: Use DCP CONNECT for advanced setup or EZ CONNECT for basic volume control on any device.Compact, Half-Rack Design: Easily mounts under desks or in racks with included brackets.Status and Signal Indicators: Visual feedback for input activity, Dante connection, and network status.
Spécifications
General Specifications
4 channel mic line input with phantom power support EuroblockRemote mic gain control via Dante or software4 Dante input and output channelsBuilt in DSP with 8 in 4 out matrix mixer24 bit resolution with sampling rates of 44.1 48 88.2 96 kHzHalf rack mountable sizeSignal indicators for input monitoringScene preset function with up to 50 presetsSupports Dante daisy chainingPoE Power over Ethernet class 0 supportCompatible with TASCAM DCP CONNECT and EZ CONNECT softwareRemote control via GPI and DanteCompatible with Windows macOS iOS and AndroidIncludes surface mount bracketsOptional rack shelf AK RS1 for dual unit installation
Audio Performance
Mic amp EIN minus 125 dBuFrequency response 20 Hz to 20 kHz at 44.1 48 kHz and 20 Hz to 40 kHz at 88.2 96 kHzDistortion THD plus N 0.003 percentSignal to noise ratio 108 dBCrosstalk 100 dBDynamic range 108 dB
Analog Inputs
Connector Euroblock balanced 3.81 mm pitchMinimum input level minus 70 dBuMaximum input level plus 26 dBuInput impedance 2 k ohms or higher
Dante Interface
Connector RJ45Protocol DanteEthernet standard 1000BASE T IEEE 802.3abCable requirement Cat 5e or higher STP cables
Control I O
GPI Connectors Euroblock 3.81 mm pitchLED output format open collector 10 ohms 48V 35mASWITCH input voltage max 5.5V min high level 2.31V max low level 0.99V
Power and Environmental
Power supply PoE class 0 or optional TASCAM PS P1220EPower consumption 7.5WOperating temperature 0 to 40 degrees CelsiusDimensions 214 x 44.45 x 136.1 mmWeight 885 grams
Included Items
MM 4D IN E unitInstallation brackets x 2Euroblock plugs x 4Cable band kit x 1Owner's manual with warranty
Écrire une évaluation à propos du Tascam MM-4DIN-E
Voir plus de produits pour la marque
Tascam
