4 XLR mic line inputs with phantom power, 4 Dante I O, DSP with 8x4 matrix mixer, PoE support, remote control, half rack size, scene presets
The TASCAM MM-4D/IN-X is a professional-grade 4-channel Dante converter designed for audio installations that demand flexibility, superior sound quality, and networked integration. Featuring four XLR mic/line inputs with phantom power and studio-quality mic preamps, it's ideal for capturing clear and detailed audio in complex environments.
Equipped with a robust 8-in/4-out DSP matrix mixer, the MM-4D/IN-X allows seamless routing and processing of Dante and analog signals. With support for 24-bit/96kHz audio, PoE power, and remote configuration through TASCAM's DCP CONNECT or EZ CONNECT software, this half-rack unit delivers high performance in a compact footprint-making it perfect for broadcast, live sound, and AV integration projects.
Caractéristiques
4 Mic/Line Inputs with Phantom Power (XLR): Handles mic or line-level sources with +48V phantom power for condenser mics.
Remote Mic Gain Control: Adjust input levels remotely via control software or Dante network.
4 Dante Inputs and 4 Dante Outputs: Seamless connection and integration into Dante-based systems.
Built-In DSP with 8x4 Matrix Mixer: Route and mix analog and Dante inputs to any output zone with onboard processing.
Advanced Audio Processing Tools: Includes EQ, compression, ducking, auto-level, noise compensation, and limiter.
Studio-Quality TASCAM Preamps: Delivers ultra-low noise and high headroom for clean, professional audio.
PoE Powered: Operates using a single network cable for both power and data.
Remote Control Software Options: Use DCP CONNECT for advanced configuration or EZ CONNECT for basic controls.
Compact Half-Rack Design: Mounts easily in tight spaces or under desks using included brackets.
Signal and Network Status Indicators: Visual monitoring of input activity and Dante network health.
Spécifications
General Specifications
4 channel mic line input with phantom power support XLR
Remote mic gain control via Dante or software
4 Dante input and output channels
Built in DSP with 8 in 4 out matrix mixer
24 bit resolution with sampling rates of 44.1 48 88.2 96 kHz
Half rack mountable size
Signal indicators for input monitoring
Scene preset function with up to 50 presets
Supports Dante daisy chaining
PoE Power over Ethernet class 0 support
Compatible with TASCAM DCP CONNECT and EZ CONNECT software
Remote control via Dante
Compatible with Windows macOS iOS and Android
Includes surface mount brackets
Optional rack shelf AK RS1 for dual unit installation
Audio Performance
Mic amp EIN minus 125 dBu
Frequency response 20 Hz to 20 kHz at 44.1 48 kHz and 20 Hz to 40 kHz at 88.2 96 kHz
Distortion THD plus N 0.003 percent
Signal to noise ratio 108 dB
Crosstalk 100 dB
Dynamic range 108 dB
Analog Inputs
Connector XLR 3 31 balanced
Minimum input level minus 70 dBu
Maximum input level plus 26 dBu
Input impedance 2 k ohms or higher
Dante Interface
Connector RJ45
Protocol Dante
Ethernet standard 1000BASE T IEEE 802.3ab
Cable requirement Cat 5e or higher STP cables
Power and Environmental
Power supply PoE class 0 or optional TASCAM PS P1220E
