Speaker cabinet emulator pedal and DI with 32 guitar and bass cabs including 8 microphones and 12 rooms per cab
C.A.B. M+ offers a studio grade, amp-free rig loaded with 32 premium DynIR Virtual Cabinets. Every cabinet includes a choice of 12 room emulations and 8 mics.
Building on the success of the acclaimed Torpedo C.A.B. M, the C.A.B. M+ includes a stunning clean preamp, refined power amps, enhancer, tuner, expanded reverbs and noise gate.
Pair Torpedo C.A.B. M+ with your phone, tablet or computer. Change the cabinet, microphones, room, EQ, reverb or edit any parameter via Torpedo Remote or directly from the hardware.
No other pedal platform offers such universal control of the miking chain and with dual miking per cabinet, your rig reaches new heights of authenticity and flexibility.
Spécifications
Input / Output Amp/Inst/Line Input:
1/4? Jack balanced (TRS)
In Level Switch*:
+12dB: Max level: 4 dBu, Impedance: 1 MOhms
0dB: Max level: 16 dBu, Impedance: 57 kOhms
-24dB: Max level: 40 dBu, Impedance: 47 kOhms
*Affects input sensitivity and impedance
Aux In:
1/8? (3.5mm) TRS Jack
Downmixed to mono
Speaker output*: 1/4? Jack balanced (TS)
*Unprocessed, unbuffered, directly connected to Amp In
DI output*:
XLR balanced
Max level: 10 dBu
Impedance: 300 Ohms
*Protected against +48V phantom power
Line output:
1/4? Jack balanced (TRS)
Max level: 10 dBu
Impedance: 300 Ohms
Headphones output:
1/8? Mini-Jack (TRS)
USB connector:
USB 2.0 Micro-B
Memory card:
256Mb Micro-SD included Up to 32Gb cards supported
Digital Audio AD/DA Converters:
Studio-grade 24-bit / 96 kHz
Bandwidth (-1dB):
30 Hz " 19 kHz
Signal-to-noise ratio:
91 dB
Internal Processing:
32-bit floating-point
Latency:
2.2 ms (Line Input to Line Output)
Power Power input connector:
DC connector, 2.1mm x 5.5mm, center negative
Supplied adapter:
100-240v AC to 12v DC 1A
Power consumption:
Approximately 2W
Current consumption:
200mA
Dimensions & weight Width x Depth x Height*:
12.1cm x 10cm x 6cm " 4.8? x 4? x 2.4?
*Including connectors and knobs
