Cart
Settings
Languages
English | Français
The entire Studio Economik's website is now priced in Canadian Dollars only.

$3133.00

Free shipping in Canada. Conditions

MCR42 is a camera receiver designed for best-in-class performances.



Wisycom receivers are internally coupled by two in a real TRUE DIVERSITY CONFIGURATION. Its front end has a chain of microcontrolled-driven movable filters to allow BROADBAND OPERATION up to 240 MHz with great selectivity.

A powerful low consuption DSP gives you the best of analogue and digital technologies in an hybrid approach for smooth operations, high coverage and with our patented PTT (push to talk) already integrated.

Variant
MCR41 is the version with only one diversity RX board mounted. It supports all features of MCR42 and is compatible with MCR42 Firmware. It is also possible to mount the second Rx board to upgrade a MCR41 to an MCR42.

Features

  • Dual true diversity in a modular stand-alone or slot-in format.
  • Switching bandwidth up 240 MHz in the UHF range.
  • DSP based audio processing for unbeatable audio and digital outputs with our PTT (push to talk) patented technology already integrated.
  • 40 groups of 60 frequencies fully user programmable.
  • Multicompander operations
  • Infrared interface for programming and transmitter synchronization

  • Wisycom exclusive digital sub-carrier telemetry technology allows:
  • remote TX battery monitoring
  • tone-squelch operating
  • PTT function (An optional back-panel module is available, with the secondary intercom output)

  • Easy setup and operation thru a OLED

    Specifications

    Frequency ranges
  • N option: 470 ÷ 700 MHz
  • M option: 566 ÷ 798 MHz

  • Switchable channels
  • 2400 managed in 40 groups ofr 60 frequencies completely user customizable

  • Switching-window
  • Up 232 MHz

  • Frequencies
  • microprocessor controlled frequency synthesizer circuit, with 25 kHz minimum step;
  • frequencies is easily PC reprogrammed with optional UPK300E/UPKmini programmer

  • Frequency error
  • < ± 2.5 ppm, in the rated temperature range

  • Modulation
  • FM, with de-emphasis

  • Nominal deviation
  • ±40 kHz (Max. operating dev. = ± 60 kHz)

  • "A" / "B" antenna inputs
  • with SMA connectors

  • Antenna input impedance
  • 50 ohm sma type (SWR < 1:2; typ. 1:1.4)

  • Sensitivity
  • 2 μV ( 6 dBμV), for SND/N > 58 dB;
  • 5 μV (14 dBμV), for SND/N > 98 dB
  • in the whole switching-window*

  • Amplitude response
  • < 0.5 dB (RF input sig.: 6 dBμV ÷ 100 dBμV)

  • Co-channel rejection
  • > 2.5 dB

  • Adjacent chan. selectivity
  • > 80 dB typical (for ch. spacing ≥ 400 kHz)

  • Spurious rec. rejection
  • > 100 dB

  • IF image rejection
  • > 90 dB

  • Intermod. rejection
  • > 76 dB

  • IIP3
  • > +10 dBm typical

  • Spurious emissions
  • < 2 nW (typical = 0.1 pW)

  • Noise Reduction system
  • ENR / ENR-1.2 (Wisycom Extended-NR), noise optimized
  • ENC / ENC-1.2 (Wisycom Extended-NC), voice optimized & with reduced pre-emphasis
  • ⇒ Others, compatible with most systems, thru an internal DSP emulation of SA572, SA575 and Rms envelope compander chip set, fully user programmable

  • AF bandwidth
  • 30 Hz ÷ 20 kHz

  • Frequency response
  • ± 0.5 dB in the 30 Hz ÷ 19 kHz range

  • Distortion
  • MCR42S: 0.3 % typical MCR42S2/S3: 0.1 % typical

  • SND/D ratio (Analogue)
  • 110 dB typical*

  • SND/D ratio (AES3)
  • MCR42S: >125 dB typical MCR42S2/S3: >140 dB typical

  • Audio output
  • 2 audio line-outpus electronically balanced on two 3 pin mini-XLR Female connector

  • Audio output level
  • Adjustable 1 dB step between (peak dev level): -30dBu [MCR42S/S2/S3] /-18dBu [MCR42] to +12dBu [MCR42/S/S2] / +18dBu [MCR42S3]

  • Audio line-output imped.
  • ≤ 200 ohm

  • PTT line-output 1 & 2
  • Electronically balanced on a 5 pin mini-XLR Male connector

  • Digital output
  • digital line-output 1 & 2 electronically balanced on 3 pin mini-XLR Male connector

  • Digital sample rate
  • AES3 @ 48 kHz

  • POWER LEDs
  • (NEW display) 1 multicolour RGB LEDs for the power status of the receiver
  • (OLD display) 2 multicolour RGB LEDs to easy indicate Rx1 & Rx2 power status

  • RF LEDs
  • 2 multicolour RGB LEDs to easy indicates Rx1 & Rx2 RF status. Always on in normal operation

  • AUDIO LEDs
  • 2 multicolour RGB LEDs to easy indicates Rx1 & Rx2 audio status

  • Front buttons
  • Simple operation with 4 buttons to quickly monitor and setup the receiver.
  • One touch function for a frequency scan and sync function.

  • Powering
  • External = 5 ÷ 18 Vdc (1.5 W max)
  • Autonomous. = with optional BCA 42 Battery Module (5 x IEC-LR6 1.5V size-AA alkaline or rechargeable elements)

  • Power consumption
  • MCR42 max 125mA @ 12V Approx. 6 hours (with battery pack BCA42)
  • MCR41 max 95mA @ 12V

  • Battery life
  • approx. 6 hours with battery pack BCA42 (5 x IEC-LR6 1.5V size-AA alkaline)

  • Temperature range
  • -10 ÷ +55 °C

  • Dimensions
  • "Slot-in" execution= 115 x 68 x 18 mm (HxWxD), "Stand-alone" exec.= 135 x 68 x 18 mm (HxWxD)

  • Weight
  • 180 g approx.


  • *RMS value, A-weighted, 22 Hz / 22 KHz

    Reviews

    $3133.00

    Free shipping in Canada. Conditions
    View more products from Wisycom
    Wisycom Logo
    Like us
    Follow us
    Now accepting
    ©2004-2019 - Studio Economik Inc.® All Right Reserved.