AP-10

Compact Installation Format
The 1U half-rack chassis fits installations with limited space. An optional mounting kit supports rack installation or mounting above or below shelves.

GPIO System Integration
Trigger audio from external control panels, sensors and timers. Playback-status outputs can activate connected lighting, displays and other equipment.

OSC Network Control
Control playback over Ethernet from computers, tablets and custom interfaces created with TouchOSC or similar applications.

Five Playback Modes
Direct, Single, Interval, Binary and Program modes support triggered messages, priority playback, recurring announcements and preset sequences.

Dual-Mono Playback
Use the left and right channels independently to play two separate audio programs simultaneously for different areas or applications.

Automatic Background Music Ducking
Mix incoming line-level audio with SD playback and automatically lower the background music during announcements.

Offline Playlist Preparation
Use TASCAM Playlist Editor to prepare playlists and event lists, convert audio into compatible formats and configure playback before installation.

Detailed Per-File Settings
Adjust volume, start and end points, fades, trigger delay, repeat behavior and A-B repeat settings for individual audio files.

Playback and Output Equalization
Shape audio with four-band playback EQ and two-band output EQ, alongside adjustable output level.

Manual Interrupt Operation
Start interrupt playback or stop audio directly from the front panel. Manual operation remains available if the external control system becomes unavailable.

Power-On Playback
Automatically start playback according to contact-input status when the unit powers on, supporting unattended daily operation.

Computer File Access
USB mass-storage mode provides direct computer access to playlists and audio files through the USB-C connection.

Flexible Analog Connections
Connect background music through RCA line inputs and feed installed systems through balanced Euroblock or unbalanced RCA outputs. A headphone output supports local monitoring.

Protected Hardware and Controls
A metal chassis, protected SD card slot, Euroblock safety holder and panel lock help prevent accidental disconnection, card removal and setting changes.

Flexible Power Options
Power the player using the included dedicated AC adapter or through the GPIO power input.

General
Device Type: SD announcement audio player
Playback Channels: 2-channel stereo / 1-channel mono
Independent Playback: Dual mono
Chassis Format: 1U half-rack
Playback Modes: Direct, Single, Interval, Binary, Program
Binary Playback Selection: Up to 250 audio files
Playback EQ: 4-band
Output EQ: 2-band
Output Level: Adjustable

Supported Media
SD Cards: 512 MB to 2 GB
SDHC Cards: 4 GB to 32 GB
SDXC Cards: 64 GB to 512 GB
Media Speed Requirement: Class 10 or higher
Media Formatting: Must be formatted by the player
File System up to 2 GB: FAT16
File System above 2 GB through 4 GB: FAT32
File System above 4 GB: exFAT
Maximum File Size: 2 GB
Maximum File Count: 999, including folders

Audio File Playback
File Format: WAV, LPCM
Sample Rate: 48 kHz
Bit Depth: 24-bit
Per-File Settings: Volume, start/end points, fade-in/out, trigger delay, repeat count/interval and A-B repeat range/count
Automatic Playback: Power-on Play based on contact-input status
Ducking: Automatic attenuation of line-input audio during playback

Balanced Analog Outputs
Connectors: Euroblock, 3.81 mm pitch
Rated Output Level: +4 dBu / 1.23 Vrms, output attenuation off
Maximum Output Level: +24 dBu / 12.3 Vrms, output attenuation off
Output Impedance: 100 Ω

Unbalanced Analog Outputs
Connectors: RCA
Rated Output Level: -10 dBV / 0.316 Vrms, output attenuation off
Maximum Output Level: +6 dBV / 2.0 Vrms, output attenuation off
Output Impedance: 210 Ω

Unbalanced Analog Inputs
Connectors: RCA
Rated Input Level: -10 dBV / 0.316 Vrms
Maximum Input Level: +6 dBV / 2.0 Vrms
Input Impedance: 10 kΩ or higher

Headphone Output
Connector: 6.3 mm / 1/4" standard stereo jack
Maximum Output Power: 20 mW + 20 mW or higher into 32 Ω
Output Power Measurement Condition: THD+N of 0.1% or less
Recommended Headphone Impedance: 16–600 Ω
Headphone Compatibility Note: Sufficient volume may not be achieved with some low-impedance headphones

USB Interface
Connector: USB Type-C
Standard: USB 2.0 High-Speed, 480 Mbps
Device Class: Mass storage
Function: Computer access to playlists and audio files

Network Control
Connector: RJ45
Ethernet Standard: 100BASE-TX
Control Protocol: OSC, Open Sound Control
Port Number: 5000
Cable Requirement: Category 5e or higher

GPIO Interface
Connector: Female 25-pin D-sub
Locking Screws: No. 4-40 UNC, inch type
Functions: External playback triggering, playback-status output and power input

Software
Content Preparation: TASCAM Playlist Editor
Editor Functions: Offline playlist and event-list editing, compatible audio conversion and per-file playback configuration

Audio Performance
Frequency Response: 20 Hz to 20 kHz, ±1.0 dB
Distortion: 0.008% or less
Signal-to-Noise Ratio: 93 dB or higher
Dynamic Range: 90 dB or higher
Channel Separation: 90 dB or higher at 1 kHz
Measurement Path: SD playback to analog output
Measurement Standard: JEITA

Power
Dedicated AC Adapter: PS-P1220E, included
Alternative Power Input: GPIO
Power Consumption: 4 W

Dimensions and Weight
Dimensions Excluding Protrusions (W × H × D): 214.0 × 44.2 × 165.2 mm
Dimensions Including Protrusions (W × H × D): 214.0 × 46.5 × 181.7 mm
Weight: 1.2 kg

Operating Conditions
Operating Temperature: 0–40 °C / 32–104 °F
Operating Humidity: 25–85% RH at 32 °C, non-condensing

Included Components
SD audio player
PS-P1220E AC adapter
SD card protector kit
Euroblock plugs (2)
Cable ties (3)
TASCAM ID Registration Guide
Owner’s Manual, Basic Operation