Mix Back Mixer w/ Remote

Input Channel Features:

16 quality Mic/Line inputs with passive XLR split

Pin 1 lift and Mic phantom power switches

Channel inserts

Signal/Clip LED indicator

100 Hz high-pass filter

Gain control

4 band EQ with separate controls for sweep and cut/boost on mid bands

Two stereo level and pan controls (ST1 and ST2)

Twelve mono level controls (1-12)

Switch selectable effects 1-2 sends

Master Features:

2 stereo and 12 mono TRS outputs

Switch selectable meter/headphone monitoring

2 stereo TRS balanced effect returns

Switch assignable FX1/FX2 returns to the 12 mono masters

Stereo Aux return with level controls to both stereo busses - great for FOH mix or the studio "two mix"

Buss inputs permit stacking of multiple mixers

Talk back mic preamp assignable to stereo masters 1 and 2, mono outputs 1-12, and the balance Intercom/slate output

Relay contact when the talk back intercom switch is pressed

16 button talkback remote connects using standard CAT5e cable

16 channels of ADAT and HearBus output

Other Features:

Universal internationally approved internal power supply

11 RU chassis

All analog inputs and outputs are balanced

Passive Microphone Split (Each Channel)

Mic In to Mic Out: Passive
Mic Power: +18 VDC
Pin 1 Lift: Output XLR

Mic Input to Insert Output

Conditions: +14 dBu input, Gain full CCW, 150 Ω, Balanced
Frequency Response:
20 Hz to 20 KHz, +/- 0.05 dBu
10 Hz to 120 KHz, +/- 0.3 dBu
THD+N: 0.002%, 22 Hz to 22 KHz, unweighted
IMD: 0.004%
EIN: -121 dBu, 150 Source, -40 dBu input

Mic Pre to Master Output

Conditions: 0 dBu input, Gain full CCW, 150 Ω, Balanced
Frequency Response: 20 Hz to 20 KHz, +/- 0.5 dBu
THD+N: 0.004%, 22 Hz to 22 KHz, unweighted
IMD: 0.004%
Maximum Gain: 60 dBu, EQ Flat

Line Inputs to Insert Outputs

Conditions: +18 dBu input, Gain full CCW, 150 , Balanced
Frequency Response: 20 Hz to 20 KHz, +/- 0.3 dBu
THD+N: 0.005%, 22 Hz to 22 KHz, unweighted
IMD: 0.005%
Maximum Gain: 10K , balanced
Attenuation: 18 dB

Channel Equalization

Hi Frequency: 10 KHz shelving, +/- 15 dB
Hi Mid Frequency: 500 Hz to 15 KHz, +/- 15 dB
Lo Mid Frequency: 50 Hz to 3 KHz, +/- 15 dB
Lo Frequency: 100 Hz shelving, +/- 15 dB
Hi-Pass Filter: 100 Hz, 3 pole, 18 dB/Octave

Buss Inputs to Master Outputs

Conditions: +4 dBu input, 150 Ohms, Balanced
Frequency Response: 20 Hz to 20 KHz, +/- 0.2 dBu
THD+N: 0.005%
IMD: 0.005%
Input Impedance: 10K , balanced

Digital Output:

ADAT Output: 24 Bit, 44.1 KHz / 48 KHz Selectable
HearBus Output: 24 Bit, 44.1 KHz / 48 KHz Selectable
ADAT/HearBus 1: Master 1 L/R, Channels 1-6
ADAT/HearBus 2: Master 2 L/R, Channels 7-12

Analog Line Outputs

Maximum Output Level: +24 dBu, TRS Balanced
Output Impedance: 121 , balanced
Talkback Mic Pre Amplifier
Conditions: -40 dBu input, 150 , Balanced
Frequency Response: 20 Hz to 20 KHz, +/- 1.5 dBu
Gain: Off to 50 dBu, variable
Line Output: 121 Ω, TRS Balanced
Input Impedance: 1K , balanced
THD: 0.05%
IMD: 0.09%
Remote Control: 1-12, ST1, ST2, COM, ALL
Remote Cable: CAT5e, 500 ft. max, wired pin-to-pin

Effects (FX) Return

Conditions: +4 dBu input, 150 , Balanced
Frequency Response: 20 Hz to 20 KHz, +/- 0.5 dBu
Gain, FX return to Master: 1 dB, Master at center
THD+N: 0.0025%, 20 Hz to 20 KHz
IMD: 0.0027%, 20 Hz to 20 KHz
Input Imedance: 10K , balanced
Maximum Input Level: +10 dBu, control centered

Stereo Aux Input

Conditions: +4 dBu input, 150 , Balanced
Frequency Response: 20 Hz to 20 KHz, +/- 0.5 dBu
Gain: Off to +6 dBu, Aux to Stereo Masters
THD+N: 0.0033%, 20 Hz to 20 KHz
IMD: 0.004%, 20 Hz to 20 KHz
Input Imedance: 10K , balanced
Maximum Input Level: +8 dBu

Power Supply (Universal)

Input Voltage: 100 to 240 VAC~, 50-60 Hz
Input Current: 2 Amps
Maximum Continuous Input Power: 240 Watts
Fuse (Internal): 3.15 Amp
Inrush: 60 Amps, 2 mSec
Short Circuit Protection: Yes
AC Input Connector: IEC 320-C14, Internationa
Agency Listing: FCC class B, CISPR 22 class B, IEC 60950-1 safety, EN 61000-4-2, 4-4, 4-5

Physical

Construction: Steel Chassis / Steel Front Panel
Size (with 1” handles): 19.23" H x 19" W x 5.35" D (488mm H x 482.6mm W x 135mm D)
Unit Weight: 30.8 lbs (14 kg)
Mounting Standard rack mount, 11RU
Shipping size: 10.55" H x 25.0" W x 24.53" D (268mm H x 635mm W x 623mm D)
Shipping Weight: 42.9 lb. (19.5 kg)