Tascam MM-2D-X

2 Mic/Line Inputs with Phantom Power (XLR): Professional-grade XLR inputs with +48V phantom power and remote gain control.

2 Line Outputs (XLR): Balanced analog outputs for routing to powered speakers or amplifiers.

4 Dante Inputs and 4 Dante Outputs: Full Dante I/O for integration into audio-over-IP systems.

Built-In DSP and 6x4 Matrix Mixer: Mix and route any input to any output with ducking, noise compensation, and more.

Full DSP Processing Suite: Includes EQ, compressor, auto-level, high/low pass filter, limiter, and delay.

Premium TASCAM Mic Preamps: Low-noise, high-headroom preamps with wide gain range for studio-quality capture.

PoE Powered (Power over Ethernet): Operates through a single network cable for power and data-no extra adapter needed.

Remote Control via Software: Configure and monitor using TASCAM DCP CONNECT or EZ CONNECT on desktop or mobile.

Compact Half-Rack Form Factor: XLR connectivity in a small chassis with included surface-mount brackets.

Scene Memory and Visual Indicators: Save up to 50 system presets and monitor signal flow with status LEDs.

General Specifications

2 channel mic line input with phantom power support XLR

Remote mic gain control via Dante or software

2 channel line output

4 Dante input and output channels

Built in DSP with 6 in 4 out matrix mixer

24 bit resolution with sampling rates of 44.1 48 88.2 96 kHz

Half rack mountable size

Signal indicators for input and output monitoring

Scene preset function for up to 50 presets

Supports Dante daisy chaining

PoE Power over Ethernet class 0 support

Compatible with TASCAM DCP CONNECT and EZ CONNECT software

Remote control via Dante

Compatible with Windows macOS iOS and Android

Includes surface mount brackets

Optional rack shelf AK RS1 for dual unit installation

Audio Performance

Mic amp EIN minus 125 dBu

Frequency response 20 Hz to 20 kHz at 44.1 48 kHz and 20 Hz to 40 kHz at 88.2 96 kHz

Distortion THD plus N 0.005 percent

Signal to noise ratio 105 dB

Crosstalk 100 dB

Dynamic range 105 dB

Analog Inputs

Connector XLR 3 31 balanced

Minimum input level minus 74 dBu

Maximum input level plus 26 dBu

Input impedance 2 k ohms or higher

Analog Outputs

Connector XLR 3 32 balanced

Output impedance 200 ohms or lower

Nominal output plus 4 dBu or plus 6 dBu depending on reference level

Max output levels: plus 15 dBu at minus 9 dBFS, plus 18 dBu at minus 14 dBFS, plus 20 dBu at minus 16 dBFS, plus 22 dBu at minus 18 dBFS, plus 24 dBu at minus 20 dBFS

Dante Interface

Connector RJ45

Protocol Dante

Ethernet standard 1000BASE T IEEE 802.3ab

Cable requirement Cat 5e or higher STP cables

Power and Environmental

Power supply PoE class 0 or optional TASCAM PS P1220E

Power consumption 6W

Operating temperature 0 to 40 degrees Celsius

Dimensions 214 x 44.45 x 136.1 mm

Weight 878 grams

Included Items

MM 2D X unit

Installation brackets x 2

Owner's manual with warranty